Faults; Repair / Calibration; Spare Parts - Simco TOP GUN III Bedienungsanleitung

10. Faults

Problem
Gun is not blowing
No ionisation
(LED in gun does not light
up)
table 1 Top Gun faults

11. Repair / Calibration

Warning:
Repairs shall be made by a skilled electrical engineer.
When opening the power unit, you may touch parts under hazardous voltage. SIMCO
recommends you to return the complete installation (gun + power unit) if there is a need for
repair and/or calibration.
Pack them properly and clearly state the reason for return.

12. Spare parts

65.07.50.9010
65.07.50.9050
65.07.50.0007
65.07.50.0014
65.07.90.1020
65.07.50.1520
65.07.90.2020
Top Gun 97.52.05.04.20
Cause
No (mains) voltage
No compressed air
Filter nozzle clogged
No (mains) voltage
Defective power unit
Filter nozzle kit (2 off)
Gun hanger
Gun with 2,1 m. of cable/hose
Gun with 4,25 m. of cable/hose
HV transformer - 230 V
Printed circuit board for power unit - 230 V
Air valve - 230 V
Remedy
Restore (mains) voltage
Restore compressed air
supply
Replace filter nozzle
Restore (mains) voltage
Repair the power unit
18
03/99