Maintenance - Simco TOP GUN III Bedienungsanleitung

9. Maintenance

Warning:
When carrying out work on the equipment: De-energise the equipment.
9.1. Emitter point
The emitter point must be clean and sharp.
Regularly clean the emitter point with a cotton tip or a soft cloth, slightly soaked in alcohol.
Make sure that:
− no lint remains on the emitter point.
− the point is entirely dry before switching on the Top Gun again.
9.2. Replacing the filter nozzle
The filter turns red as a result of fouling. Replace the filter nozzle when it is discoloured.
1. De-energise the Top Gun.
2. Disconnect the compressed air supply.
3. Remove the filter nozzle.
For this purpose, insert a screwdriver between the filter nozzle and the locking ring. Push the
filter nozzle forwards (see sketch).
4. Fit a new filter and press it into place.
Top Gun 97.52.05.04.20
17
03/99