Technical Characteristics; Environmental Protection; Declaration Of Conformity - Cea Aqc32 Bedienungsanleitung

EN

TECHNICAL CHARACTERISTICS

Electrical current: 12Vcc ± 3%
Maximum consumption: 1.3 A - 8.4 A
Functioning: Continuous
Ambient functioning temperature: from 0 to + 40 °C
Relative humidity without condensation: 5% - 90%
Protection rating: IP55
Entry and exit connection: rising clamp terminal blocks
ENIC Directive: EN55022/B
WARNING
Before connecting the unit for the first time, carefully read
the following sections.
AC currents are different from country to country.
Ensure that the current where you live conforms to the
current required for this equipment.
POWER SUPPLY
Electrical current:
Input: 100 - 220VAC 50/60Hz ± 20%
Output: 12Vcc ± 3%
Power: 48 Watt
It is strongly advised to use the feeder provided by
CEADESIGN Srl s.u.; in the event of a different feeder,
ensure that the specifications are compatible with the
equipment provided.
Using a feeder of different or incompatible specifications
can irreparably damage the equipment and invalidate the
guarantee.
CLASS 2 LASER PRODUCT
Class 2 laser rays are considered to be without risk, but
could be potentially dangerous. Normally they do not
cause any permanent damage if shone into unprotected
eyes for a few moments.

ENVIRONMENTAL PROTECTION

Electrical and electronic equipment is not to be treated as
domestic refuse.
Consumers are obliged by law to dispose of nolonger
useful electrical and electronic equipment at the
appropriate collection or sales points.

DECLARATION OF CONFORMITY

We, CEADESIGN Srl s.u., declare that the product
featured in these instructions conforms to Directive
2006/95/EC relating to "Electrical equipment designed for
use within certain voltage limits" and to Directive
2004/108/EC relating to "Electromagnetic compatibility".
12
AQC32
_ REV10
AVVERTENZE TECNICHE
/
TECHNICAL WARNINGS
ceadesign.it