Parts And Components; Before Use - Cecotec Longflex 710 Pro Bedienungsanleitung

ESPAÑOL
El cumplimiento de las pautas anteriores ayudará a proteger el medio ambiente.
7. COPYRIGHT
Los derechos de propiedad intelectual sobre los textos de este manual pertenecen a
CECOTEC INNOVACIONES, S.L. Quedan reservados todos los derechos. El contenido de esta
publicación no podrá́ , ni en parte ni en su totalidad, reproducirse, almacenarse en un sistema
de recuperación, transmitirse o distribuirse por ningún medio (electrónico, mecánico,
fotocopia, grabación o similar) sin la previa autorización de CECOTEC INNOVACIONES, S.L.
98
TOTALPAINT 750 INSTRUCCIONES ORIGINALES

1. PARTS AND COMPONENTS

Fig. 1
1. Nozzle
2. Air cap
3. Union nut
4. Front gun body
5. Trigger
6. Rear gun body
7. Spray material volume control
8. Air filter cover
9. Power cord
10. Container
Note:
The graphics in this manual are schematic representations and may not exactly match the
product.

2. BEFORE USE

- This appliance comes in a packaging designed to protect it during transport. Remove the
appliance from its box. You can keep the original box and other packaging materials in a
safe place to prevent damage to the appliance if you need to transport it in the future. If
you wish to dispose of the original packaging, make sure all items are recycled properly.
- Check that all parts and components are included and in good condition. If any of them
are missing or damaged, please contact Cecotec's Official Technical Support Service
immediately.
Box content:
- Paint spray gun
- 1 mm nozzle
- 1.5 mm nozzle
- 2 mm nozzle
- 2.5 mm nozzle
- 3 mm nozzle
- Container lid
- Viscosity measuring cup
ORIGINAL INSTRUCTIONS
ENGLISH
99
TOTALPAINT 750