General Power Tool Safety Instructions; Electrical Safety; Personal Safety - Cecotec Longflex 710 Pro Bedienungsanleitung

ENGLISH

GENERAL POWER TOOL SAFETY INSTRUCTIONS

Read the following instructions carefully before using the
appliance. Keep this instruction manual for future reference or
new users.
- WARNING: read all safety warnings, instructions,
figures and specifications supplied with this power tool.
Failure to follow all instructions listed below may result in
electric shock, fire and/or serious injury.
- WARNING: read all safety warnings and instructions
marked with the symbol.
- Keep all safety warnings and instructions for future reference.
1) Work area safety
a) Keep the work area clean and well illuminated.
b) Do not operate power tools in explosive environments,
such as in the presence of flammable liquids, gases or dust.
Power tools create sparks that may light dust or fumes.
c) Keep children and bystanders away while operating a power
tool. Distractions can make you lose control of the tool.

2) Electrical safety

a) The power tools plugs must match the socket. Never
modify the plug. Do not use adapter plugs with earthed
power tools. The unmodified plugs and the suitable
sockets reduce the risk of electric shock.
b) Avoid body contact with earthed surfaces, such as pipes,
radiators, stoves and refrigerators. There is a higher risk of
electric shock if your body is in touch with grounded surfaces.
c) Do not expose power tools to rain or wet conditions. The
water inlet in a power tool increases the risk of electric
shock.
12
TOTALPAINT 750 ORIGINAL INSTRUCTIONS

Personal safety

a) Stay alert and use common sense when using a power
tool. Do not use power tools if you are tired or under
the influence of drugs, alcohol or medication. Lack of
attention while operating power tools may result in
serious personal injury.
b) Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety footwear, helmet or hearing protection,
used under appropriate conditions, will reduce personal
injuries.
c) Avoid unintentional start-up. Make sure the switch
is in the off position before connecting the tool to a
power source and/or battery, or before picking it up or
transporting it. Carrying power tools with your finger on
the switch or plugging in power tools with the switch in
the on position may cause accidents.
d) Remove any adjusting key or wrench before turning the
power tool on. A wrench or a key left attached to a rotating
part of the power tool may result in personal injury.
e) Do not exert too much force when using the tool. Keep
your feet firmly on the ground and maintain your balance
at all times. This will provide better control of the power
tool in unexpected situations.
f) Wear appropriate clothes. Do not wear loose clothing
or jewellery. Keep hair and clothing away from moving
parts. Loose clothes, jewellery or long hair can get
caught in moving parts.
g) If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Dust vacuuming can
reduce dust-related hazards.
ORIGINAL INSTRUCTIONS
ENGLISH
13
TOTALPAINT 750