Technical Data; Rating Plate - IKEA HÖGKLASSIG Bedienungsanleitung

ENGLISH
phase connection requires a mains cable
of minimum 90°C temperature stability.
Cable has been provided with end
sleeves. According to IEC regulations use
for one-phase connection: mains cable 3
x 4mm² and for two-phase connection:
mains cable 4 x 2.5mm². Please respect
in first priority specific national
regulations.
• The appliance works perfectly on AC
230 V, AC 220 V~ or AC 240 V~ 50 Hz
electrical network.
• You must have the means for
disconnection incorporated in the fixed
wiring. Have the appliance connected to
the mains using a device that allows the
appliance to be disconnected from the
mains at all poles with a contact opening
width of at least 3 mm, eg. automatic line
protecting cut-out, earth leakage trips or
fuse.

Technical data

Rating Plate

Made in Germany
© Inter IKEA Systems B.V. 1999
603.039.33
IKEA of Sweden AB
21552
SE - 343 81 Älmhult
The graphic above represents the rating
plate of the appliance without serial
number, which is located at its underneath
surface of the casing.
Dear Customer, keep the additional rating
plate with the user manual. This will allow us
• You must have the connection and the
connecting links carried out as shown in
the connection diagram (it is located on
the underneath surface of the casing of
the hob). The earth lead is connected to
terminal marked with the symbol and
must be longer than leads carrying
electric current. Tighten the terminal
screws securely! Finally, secure the
connecting cable with the mains cable
cleat and the covering closed by
pressing firmly (lock into place).
Warning! Once connected to the
mains supply check that all
cooking zones are ready for use
by briefly setting each to
maximum power.
Model HÖGKLASSIG Typ 60 GBD CL AU 7.4kW
PNC 949 594 395 01 S No .................... 220V-240V AC 50-60 Hz
to assist you better, by identifying precisely
your hob, in case you will need in future our
assistance. Thank you for your help!
22
230 V
DGT