IKEA HÖGKLASSIG Bedienungsanleitung Seite 15

ENGLISH
To set the power setting use one of the left
side power selector.
Correct cookware position:
To use this mode you have to place the
cookware on the four connected sections. If
you use cookware smaller than three
sections the display shows
minutes the zone deactivates.
Incorrect cookware position:
This function allows you to adjust the
temperature by moving the cookware to a
different position on the induction cooking
area.
and after 2
The function divides the induction cooking
area into three areas with different power
settings. The hob senses the position of the
cookware and sets the power setting
corresponding with the position. You can
place the cookware in the front, middle or
rear position. If you place the cookware in
the front you get the highest power setting.
You can decrease the power setting by
moving the cookware in the middle or to the
rear position.
Pre-Set Cooking mode
Use only one pot when you
operate the function.
15