Herunterladen Inhalt Inhalt Diese Seite drucken
Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 31
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
No part of this installation guide may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this guide may or may not be registered
trademarks or copyrights of their respective companies, and are used only for
identification or explanation and to the owners' benefit, without intent to infringe.
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Specifications and information contained in this guide are furnished for informational
use only and subject to change without notice, and should not be constructed as a
commitment by ASRock. ASRock assumes no responsibility for any errors or
omissions that may appear in this guide.
With respect to the contents of this guide, ASRock does not provide warranty of any
kind, either expressed or implied, including but not limited to the implied warranties or
conditions of merchantability or fitness for a particular purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from
any defect or error in the guide or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
ASRock Website: http://www.asrock.com
Published August 2004
Copyright©2004 ASRock INC. All rights reserved.
1 1 1 1 1
ASRock K7Upgrade-600 Motherboard
Downloaded from
www.Manualslib.com
manuals search engine
Inhaltsverzeichnis
loading

Inhaltszusammenfassung für ASROCK K7UPGRADE

  • Seite 1 ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this guide. With respect to the contents of this guide, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.
  • Seite 2 Internal Audio Connector: AUX1 ( White ) Primary Serial ATA Connector ( SATA1 ) ATX Power Connector ( ATXPWR1 ) Clear CMOS Jumper ( CLRCMOS2 ) 2 2 2 2 2 ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 3 Line Out (Lime) RJ-45 Port USB 2.0 Ports Game Port Serial Port (COM1) Microphone (Pink) PS/2 Keyboard Port (Purple) Line In (Light Blue) PS/2 Mouse Port (Green) 3 3 3 3 3 ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 4: Package Contents

    1. Introduction 1. Introduction 1. Introduction 1. Introduction Thank you for purchasing ASRock K7Upgrade-600 motherboard, a reliable mother- board produced under ASRock’s consistently stringent quality control. It delivers excellent performance with robust design conforming to ASRock’s commitment to quality and endurance.
  • Seite 5 LAN: Speed: 802.3u (10/100 Ethernet), supports Wake-On-LAN Hardware Monitor: CPU Temperature Sensing Motherboard Temperature Sensing CPU Overheat Shutdown to Protect CPU Life (ASRock U-COP)(see CAUTION 1) CPU Fan Tachometer Chassis Fan Tachometer Voltage Monitoring: +12V, +5V, +3.3V, Vcore K8 Bridge:...
  • Seite 6 “Manual” option as the FSB setting in BIOS setup to perform over clocking. Please check page 26 of the User Manual in the Support CD for details. 6 6 6 6 6 ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 7: Cpu Installation

    STEP 5: Install CPU fan and heatsink. For proper installation, please kindly refer to the instruction manuals of your CPU fan and heatsink vendors. 7 7 7 7 7 ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 8: Installing A Dimm

    2.2 Installation of Memory Modules (DIMM) 2.2 Installation of Memory Modules (DIMM) 2.2 Installation of Memory Modules (DIMM) 2.2 Installation of Memory Modules (DIMM) K7Upgrade-600 motherboard provides two 184-pin DDR (Double Data Rate) DIMM slots. Installing a DIMM Installing a DIMM...
  • Seite 9 The set of K8 Bridge allows you to upgrade your AMD 462-Pin CPU to AMD 754-Pin CPU by installing an add-on ASRock 754Bridge (optional) into this K8 Bridge on K7Upgrade-600 motherboard. Before you upgrade the AMD 462-Pin CPU to the AMD 754-Pin CPU, it is necessary to adjust the jumper settings for those required jumpers on K7Upgrade-600 motherboard.
  • Seite 10: Installing An Expansion Card

    STEP 3: Align the card connector with the slot and press firmly until the card is completely seated on the slot. STEP 4: Fasten the card to the chassis with screws. ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 11 BIOS. If you need to clear the CMOS when you just finish updating the BIOS, you must boot up the system first, and then shut it down before you do the clear-CMOS action. ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com...
  • Seite 12 (see p.2, No. 3) Note: The set of “CPU Multiplier Jumper” are designed to adjust the multiplier of CPU. For detailed information, please refer to page 17 of user Manual in the Support ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 13 1.5 Gb/s data transfer rate. Serial ATA (SATA) Either end of the SATA data cable Data Cable can be connected to the SATA hard disk or the SATA connector on the motherboard. ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 14 USB 2.0 Header ASRock I/O provides you 4 ready-to-use USB 2.0 ports on (9-pin USB67) the rear panel. If the rear USB (see p.2, No. 22) ports are not sufficient, this USB 2.0 header is available to...
  • Seite 15 (3-pin CPU_FAN1) match the black wire to the (see p.2, No. 2) ground pin. ATX Power Connector Please connect an ATX power supply to this connector. (20-pin ATXPWR1) (see p.2, No. 36) ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 16 A HDDs Hot Plug and Hot Swap F unctions for SA A HDDs K7Upgrade-600 motherboard supports Hot Plug and Hot Swap functions for SATA devices. NOTE What is Hot Plug Function? If the SATA HDDs are NOT set for RAID configuration, it is called “Hot Plug”...
  • Seite 17: Making An Sat T T T T A Driver Disk

    SATA driver diskette before you start the OS installation. STEP 1: Insert the ASRock Support CD into your optical drive to boot your system. (Do NOT insert any floppy diskette into the floppy drive at this moment!) STEP 2: During POST at the beginning of system boot-up, press <F11>...
  • Seite 18 “ASSETUP.EXE” from the BIN folder in the Support CD to display the menus. “PC-DIY Live Demo” ASRock presents you a multimedia PC-DIY live demo, which shows you how to install your own PC system step by step. To see this demo program, ®...
  • Seite 19 ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 20 ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 21 ® ® http://www.microsoft.com/whdc/hwdev/bus/USB/USB2support.mspx ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 22 ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 23 ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 24 J7 / J8 / J9 J4 / J5 J11 / J13 / J16 J7 / J8 / J9 J4 / J5 J11 / J13 / J16 ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 25 ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 26 ” ” ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 27 “ ” SATA2 SATA1 ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 28 AUX1 ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 29 ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 30 ® ® “PC-DIY Live Demo” “ ” ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 31: Einführung

    1. Einführung 1. Einführung 1. Einführung Wir danken Ihnen für den Kauf des ASRock K7Upgrade-600 Motherboard, ein zuverlässiges Produkt, welches unter den ständigen, strengen Qualitätskontrollen von ASRock gefertigt wurde. Es bietet Ihnen exzellente Leistung und robustes Design, gemäß der Verpflichtung von ASRock zu Qualität und Halbarkeit.
  • Seite 32: Spezifikationen

    Wake-On-LAN Hardware Monitor: CPU Temperaturmessung, Motherboardtemperaturerkennung, CPU Shutdown bei Überhitzung, schützt die CPU vor dem Hitzetod (ASRock U-COP)(siehe VORSICHT 1), Rotationskontrolle für CPU-Lüfter, Rotationskontrolle für Gehäuse-Lüfter, Spannungsüberwachung: +12V, +5V, +3.3V, Vcore K8 Bridge: Das K8 Bridge-Set unterstützt CPU-Aufrüstung einer AMD K7 462-pol.
  • Seite 33 Jumper-Einstellung. Sie müssen den FSB-Jumper gemäß Ihrer AMD-CPU setzen, bevor Sie mit der Option “Manual” als FSB- Einstellung im BIOS-Setup Overclocking ausführen. Details hierzu siehe Seite 26 der Bedienungsanleitung auf der Support-CD. ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 34: Sicherheitshinweise Vor Der Montage

    Schritt 5: Installieren Sie einen aktiven CPU-Kühler, der die gesamte Fläche der CPU abdeckt und eine ausreichende Wärmeableitung für den von Ihnen verwendeten CPU-Typ bietet. Weitere Hinweise finden Sie der Installationsanleitung für Ihren CPU-Kühler. ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 35: Installation Der Speichermodule (Dimm)

    2.2 Installation der Speichermodule (DIMM) 2.2 Installation der Speichermodule (DIMM) 2.2 Installation der Speichermodule (DIMM) 2.2 Installation der Speichermodule (DIMM) Die Motherboards K7Upgrade-600 beiden vier 184-pol. DDR (Double Data Rate) DIMM-Steckplätze. Einsetzen eines DIMM-Moduls Einsetzen eines DIMM-Moduls Einsetzen eines DIMM-Moduls...
  • Seite 36 (Orangefarbene Bridge (K8BRIDGE_1) + braunfarbene Bridge (K8BRIDGE_2)): Mit dem K8 Bridge-Set können Sie Ihre AMD 462-pol. CPU auf eine AMD 754-pol. CPU aufrüsten, indem Sie eine Zusatz-ASRock 754Bridge (Option) in dieser K8 Bridge auf dem K7Upgrade-600-Motherboard installieren. Vor dem Aufrüsten der AMD 462-pol.
  • Seite 37: Einbau Einer Erweiterungskarte

    Richten Sie die Karte über dem Slot aus und drücken Sie sie ohne Gewalt hinein, bis sie den Steckplatz korrekt ausfüllt. Schritt 4: Befestigen Sie die Karte mit der Schraube aus Schritt 2. ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 38: Einstellung Der Jumper

    Jumpersteckbrücke. Löschen Sie die CMOS-Daten nicht sofort nach dem Aktualisieren des BIOS. Müssen Sie die CMOS-Daten nach dem Aktualisieren des BIOS löschen, dann müssen Sie zuerst das System starten und dann ausschalten, bevor Sie das Löschen der CMOS-Daten vornehmen. ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 39 (33-pin FLOPPY1) die rotgestreifte Seite auf Stift 1 (siehe S.2 - Nr. 24) Hinweis: Achten Sie darauf, dass die rotgestreifte Seite des Kabel mit der Stift 1- Seite des Anschlusses verbunden wird. ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 40 Verbinden Sie das schwarze Stromversorgungskabel Ende des SATA-Netzkabels mit dem Netzanschluss am (Option) Laufwerk. Verbinden Sie dann Verbindung zum SATA-HDD-Stromanschluss das weiße Ende des SATA- Verbindung zum Stromversorgungskabels mit Netzteil dem Stromanschluss des Netzteils. ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 41 USB 2.0-Header ASRock I/O besitzt 4 Stan dard-USB 2.0-Anschlüsse auf der (9-pin USB67) Rückseite. Wenn die hinteren USB- (siehe S.2 - Nr. 22) Anschlüsse nicht ausreichen, steht dieser USB 2.0- Header (USB67) zur Unterstützung von 4 zusätzlichen USB 2.0- Anschlüssen zur Verfügung.
  • Seite 42 Anschluss und passen Sie den (siehe S.2 - Nr. 2) schwarzen Draht dem Erdungsstift an. ATX-Netz-Header Verbinden Sie die ATX- Stromversorgung mit diesem (20-pin ATXPWR1) Header. (siehe S.2 - Nr. 36) ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 43: Hot-Plug- Und Hot-Swap-F

    SAT T T T T A A A A A -F -F -F -F -Festplatten unktion für SA estplatten estplatten estplatten estplatten Das Motherboard K7Upgrade-600 unterstützt Hot-Plug-Funktion für SATA- Geräte. HINWEIS Was ist die Hot-Plug-Funktion? Wenn SATA-Festplatten NICHT für RAID-Konfiguration eingestellt sind, werden sie “Hot-Plug” genannt: Ein Einfügen und Entfernen von SATA-Festplatten, während das System in Betrieb ist und einwandfrei...
  • Seite 44 Sie eine SATA-Treiberdiskette, bevor Sie mit der Installation des Betriebssystems beginnen. SCHRITT 1: Legen Sie die ASRock Support-CD in Ihr optisches Laufwerk, um Ihr System hochzufahren. (Legen Sie zu diesem Zeitpunkt KEINE Diskette in das Diskettenlaufwerk ein!) SCHRITT 2: Während des Selbsttests zu Beginn des Systemstarts drücken Sie die...
  • Seite 45 Programme werden dann automatisch installiert. “PC-DIY Live Demo” ASRock präsentiert Ihnen eine Multimedia PC-DIY Live Demo, die Ihnen verdeutlicht, wie man Schritt für Schritt ein eigenes PC-System montiert. Um sich dieses Demo-Programm anschauen zu können, bitte den Microsoft ®...
  • Seite 46: Contenu Du Paquet

    1. Introduction Merci pour votre achat d’une carte mère ASRock K7Upgrade-600, une carte mère très fiable produite selon les critères de qualité rigoureux de ASRock. Elle offre des performances excellentes et une conception robuste conformément à l’engagement d’ASRock sur la qualité et la fiabilité au long terme.
  • Seite 47 Mesure de la température CPU, Mesure de température de la carte mère, Coupure auto du CPU en cas de surchauffe pour protéger le CPU (ASRock U-COP)(voir ATTENTION 1), Tachymètre de ventilateur CPU, Tachymètre de ventilateur de châssis, Surveillance du voltage: +12V, +5V, +3.3V, Vcore Bridge K8: L’ensemble Bridge K8 prend en charge la mise à...
  • Seite 48 FSB en fonction de votre UC AMD avant d’utiliser l’option “Manuel” comme réglage FSB dans la Configuration BIOS pour appliquer un over clocking. Veuillez consulter la page 26 du Manuel de l’utilisateur dans le CD d’assistance plus de détails. ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 49 Etape 5. Installez le ventilateur et le radiateur du CPU. Pour une installation correcte, reportez-vous aux manuels du fabricant du ventilateur et du radiateur de CPU. ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 50 2.2 Installation des modules mémoire (DIMM) 2.2 Installation des modules mémoire (DIMM) 2.2 Installation des modules mémoire (DIMM) La carte mère K7Upgrade-600 dispose de deux emplacements DIMM DDR (Double Data Rate) de 184-broches. Installation d’un module DIMM Installation d’un module DIMM Installation d’un module DIMM...
  • Seite 51 L’ensemble Bridge K8 vous permet de mettre à niveau votre processeur AMD 462 broches au processeur AMD 754 broches en installant le module complémentaire ASRock 754Bridge (en option) dans ce Bridge K8 sur la carte mère K7Upgrade- 600. Avant de mettre à niveau le processeur AMD 462 broches au processeur AMD 754 broches, il est nécessaire d’ajuster les réglages des cavaliers en...
  • Seite 52 Etape 3. Alignez la carte sur le connecteur et appuyez fermement jusqu’à l’insertion complète de la carte dans son emplacement. Etape 4. Fixez la carte sur le châssis à l’aide d’une vis. ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 53 CMOS lorsque vous avez fini de mettre le BIOS à jour, vous devez d’abord initialiser le système, puis le mettre hors tension avant de procéder à l’opération d’effacement de la CMOS. ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com...
  • Seite 54 (FLOPPY1 br. 33) le côté avec fil rouge côté Broche1 (voir p.2 No. 24) Note: Assurez-vous que le côté avec fil rouge du câble est bien branché sur le côté Broche1 du connecteur. ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 55 Connectez ensuite l’extrémité d’alimentation du disque connecter à l’unité blanche du cordon dur SATA d’alimentation d’alimentation SATA sur le électrique connecteur d’alimentation de l’unité d’alimentation électrique. ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 56 En-tête USB 2.0 ASRock I/O vous apporte 4 ports USB 2.0 par défaut sur (USB67 br.9) le panneau arrière. Si le nombre (voir p.2 No. 22) des ports USB à l’arrière n’est pas suffisant, cette En-tête USB 2.0 (USB67) permet de prendre en charge 4 ports USB 2.0 supplémentaires.
  • Seite 57 ETAPE 3 : Connectez l’une des extrémités du câble de données SATA sur le connecteur SATA de la carte mère. ETAPE 4 : Connectez l’autre extrémité du câble de données SATA au disque dur SATA. ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 58 SATA, vous devez créer une disquette de pilotage SATA avant de lancer l’installation du système d’exploitation. ETAPE 1 : Insérez le CD de soutien ASRock dans votre lecteur de disque optique pour démarrer votre système. (N’insérez AUCUNE disquette dans le lecteur de disquette pour l’instant!)
  • Seite 59 <Ctl> + <Alt> + <Suppr>, ou en pressant le bouton de reset sur le boîtier du système. Vous pouvez également redémarrer en éteignant le système et en le rallumant. ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 60 “PC-DIY Live Demo” ASRock vous propose une démo en directe PC-DIY multimédia, qui vous présente un guide pas à pas pour l’installation de votre propre système PC. Pour voir cette démo, vous pouvez exécuter “Microsoft Lecteur multimédia”...
  • Seite 61: Contenuto Della Confezione

    Grazie per aver scelto una scheda madre ASRock K7Upgrade-600, una scheda madre affidabile prodotta secondo i severi criteri di qualità ASRock. Le prestazioni eccellenti e il design robusto si conformano all’impegno di ASRock nella ricerca della qualità e della resistenza.
  • Seite 62 Sensore per la temperatura del processore, Sensore temperatura scheda madre, Chiusura automatica del processore in caso di surriscaldamento per proteggere la CPU (ASRock U-COP)(vedi ATTENZIONE 1), Indicatore di velocità per la ventola del processore, Indicatore di velocità per la ventola di raffreddamento, Voltaggio: +12V, +5V, +3.3V, Vcore...
  • Seite 63 FSB a seconda della propria CPU AMD prima di usare l’opzione “Manuale” come impostazione FSB nel BIOS per effettuare l’overclocking. Per ulteriori dettagli, si prega di fare riferimento alla pagina 26 del Manuale per l’utente nel CD di supporto. ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 64 Quando la leva fa clic sulla linguetta laterale significa che è bloccata. Step 5. Installare la ventola del processore e l’heatsink. Per una corretta installazione, per favore fare riferimento ai manuali di istruzione dei produttori della ventola e dell’heatsink del processore. ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 65 2.2 Installazione dei moduli di memoria (DIMM) 2.2 Installazione dei moduli di memoria (DIMM) 2.2 Installazione dei moduli di memoria (DIMM) La scheda madre K7Upgrade-600 fornisce quattro alloggiamenti DIMM DDR (Double Data Rate) a 184 pin. Installare una DIMM Installare una DIMM...
  • Seite 66 2.3 Slot di espansione (K8 Bridge, PCI e slot AGP) 2.3 Slot di espansione (K8 Bridge, PCI e slot AGP) La scheda madre K7Upgrade-600 è dotata di: 1 set di K8 Bridge, 4 slot PCI e 2 slot AGP (slot 1.5V_AGP1 supporta l’interfaccia K7 AGP e slot AGP2 supporta l’interfaccia K8 AGP).
  • Seite 67 è “APERTO”. L’illustrazione mostra un jumper a 3 pin in cui il pin1 e il pin2 sono “CORTOCIRCUITATI” quando il ponticello è CORTOCIRCUITATO APERTO posizionato su questi pin. ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 68 “Manuale” come impostazione FSB nella predisposizione BIOS per eseguire la moltiplicazione di frequenza. Le immagini illustrano come si regola la frequenza del front side bus del processore. ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 69 “Master”. Fate riferimento alle istruzioni del produttore del dispositivo IDE per maggiori dettagli. Inoltre, per ottimizzare compatibilità e prestazioni, connettete l’hard disk al connettore primario IDE (IDE1, blu) e il CD-ROM al connettore IDE secondario (IDE2, nero). ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 70 SATA Connettere al gruppo connettore power di alimentazione dell’alimentatore. USB 2.0 Header ASRock I/O è fornita di 4 porte USB 2.0 già integrate sul (9-pin USB67) pannello posteriore. Se le porte (vedi p.2 Nr. 22) USB sul pannello posteriore non sono sufficienti, questo USB 2.0 Header (USB67)
  • Seite 71 CPU a questo connettore e far (3-pin CPU_FAN1) combaciare il filo nero al pin (vedi p.2 Nr. 2) terra. Collettore alimentazione ATX Collegare la sorgente d’alimentazione ATX a questo (20-pin ATXPWR1) collettore. (vedi p.2 Nr. 36) ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 72 Se si vuole installare Windows 2000 o Windows XP sui dischi rigidi SATA, è necessario creare un dischetto driver SATA prima di iniziare l’installazione del sistema operativo. 1° PASSO: Inserire il CD di supporto ASRock nel lettore ottico prima di accendere il ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com...
  • Seite 73 3. Informazioni sul BIOS 3. Informazioni sul BIOS La Flash Memory sulla scheda madre contiene le Setup Utility. Quando si avvia il computer, premi <F2> durante il Power-On-Self-Test (POST) della Setup utility del ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 74 “PC-DIY Live Demo” ASRock presenta la dimostrazione multimediale dal vivo “PC fai da te” che guida passo dopo passo durante le procedure d’installazione del proprio sistema PC. Per prendere visione di questo programma dimostrativo, avviare “Microsoft Media Player”...
  • Seite 75: Contenido De La Caja

    1. Introducción 1. Introducción Gracias por su compra de ASRock K7Upgrade-600 placa madre, una placa de confianza producida bajo el control de calidad estricto y persistente. La placa madre provee realización excelente con un diseño robusto conforme al compromiso de calidad y resistencia de ASRock.
  • Seite 76 Monitor Hardware:Sensor para la temperature del procesador, Sensibilidad a la temperatura de la placa madre, Corte automático en caso de temperatura sobre-elevada de CPU (ASRock U-COP)(ver ATENCIÓN 1), Taquímetro del ventilador del CPU,• Taquímetro del ventilador del chasis, Monitor Voltaje: +12 V, + 5V, + 3.3V, Vcore Puente K8: El grupo del puente K8 admite la actualización de una CPU...
  • Seite 77 CPU AMD antes de utilizar la opción “Manual” como valor de configuración FSB de la BIOS para forzar la velocidad. Consulte la página 26 del Manual de usuario incluido en el CD de soporte para obtener una información más detallada. ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 78 CPU, examine su orientación o examine si los pins están ya encorvados. Paso 4. Encierre el zócalo bajando la palanca. Paso 5. Instale el disipador de calor con ventilador del CPU (consulte la documentación del disipador de calor). ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 79 2.2 Instalación de Memoria 2.2 Instalación de Memoria 2.2 Instalación de Memoria 2.2 Instalación de Memoria La placa K7Upgrade-600 ofrece cuatro ranuras DIMM DDR de 184 pines. Instalación de una DIMM Instalación de una DIMM Instalación de una DIMM Instalación de una DIMM Instalación de una DIMM...
  • Seite 80 2.3 Ranuras de Expansion (Puente K8, Ranuras PCI, y AGP) 2.3 Ranuras de Expansion (Puente K8, Ranuras PCI, y AGP) La placa madre K7Upgrade-600 cuenta con 1 grupo de puente K8, 4 ranuras PCI y 2 ranuras AGP (la ranura 1.5V_AGP1 admite interfaz AGP K7 y la ranura AGP2 admite interfaz AGP K8).
  • Seite 81 “Short”. No habiendo jumper cap sobre los pins, el jumper está “Open”. La ilustración muesta un jumper de 3 pins cuyo pin 1 y pin Short Open 2 están “Short”. ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 82 “Manual” como la configuración FSB en la configuración BIOS para llevar a cabo el forzado de velocidad. Siga las figuras para configurar la frecuencia del Front Side BUS del procesador. ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com...
  • Seite 83 IDE para conocer los detalles. Además, para optimizar la compatibilidad y el rendimiento, conecte el disco duro a la conexión IDE primaria, (IDE1, azul) y el CD-ROM a la conexión IDE secundaria (IDE2, negra). ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com...
  • Seite 84 USB 2.0 (USB45) está disponible para admitir 4 puertos USB 2.0 adicionales. Conector de módulo Infrared Soporta módulo Infrared de transmisión y recepción (5-pin IR1) wireless. (ver p.2, N. 25) ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 85 (3-pin CPU_FAN1) con el conector de tierra. (ver p.2, N. 2) Cabezal de alimentación ATX Conecte la fuente de alimentación ATX a su cabezal. (20-pin ATXPWR1) (ver p.2, N. 36) ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 86: Configuración Raid

    SATA antes de iniciar la instalación del SO. PASO 1: Inserte el CD de soporte de ASRock en la unidad óptica de la unidad para iniciar el sistema. (NO inserte ningún disquete en la unidad de disco en este momento) PASO 2: Durante la comprobación inicial (POST) del sistema, pulse la tecla <F11>...
  • Seite 87 POST, por favor reinicie el sistema apretando <Ctl> + <Alt> + <Borrar>, o apretando el botón Reset en el panel del ordenador. Para información detallada sobre como configurar la BIOS, por favor refiérase al Manual del Usuario (archivo PDF) contenido en el CD. ASRock K7Upgrade-600 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 88 Si el Menú Principal no aparece automáticamente, localice y doble-pulse en el archivo “ASSETUP.EXE” para iniciar la instalación. “PC-DIY Live Demo” ASRock presenta Usted un multimedia PC-DIY live demo, que muestra como se instalar su sistema de PC paso a paso. Para ver este demo programa, puede usar ®...

Inhaltsverzeichnis