Herunterladen Inhalt Inhalt Diese Seite drucken
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
No part of this installation guide may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this guide may or may not be registered
trademarks or copyrights of their respective companies, and are used only for
identification or explanation and to the owners' benefit, without intent to infringe.
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Specifications and information contained in this guide are furnished for informational
use only and subject to change without notice, and should not be constructed as a
commitment by ASRock. ASRock assumes no responsibility for any errors or
omissions that may appear in this guide.
With respect to the contents of this guide, ASRock does not provide warranty of any
kind, either expressed or implied, including but not limited to the implied warranties or
conditions of merchantability or fitness for a particular purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the guide or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
ASRock Website: http://www.asrock.com
Published July 2006
Copyright©2006 ASRock INC. All rights reserved.
1 1 1 1 1
ASRock K8Upgrade-NF3 Motherboard
Downloaded from
www.Manualslib.com
manuals search engine
Inhaltsverzeichnis
loading

Inhaltszusammenfassung für ASROCK K8Upgrade-NF3

  • Seite 1 ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this guide. With respect to the contents of this guide, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.
  • Seite 2 J15 Jumper nVidia Chipset J9 / J10 Jumper Clear CMOS Jumper (CLRCMOS2) Future CPU Port (FUTURE_CPU_PORT1) Chassis Speaker Header (SPEAKER 1) J1-J8 Jumpers System Panel Header (PANEL1) 2 2 2 2 2 ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 3 TABLE for Audio Output Connection Audio Output Channels Front Speaker Rear Speaker Central / Bass Side Speaker (No. 7) (No. 4) (No. 5) (No. 3) 3 3 3 3 3 ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 4: Package Contents

    In case any modifications of this manual occur, the updated version will be available on ASRock website without further notice. You may find the latest memory and CPU support lists on ASRock website as well. ASRock website http://www.asrock.com...
  • Seite 5 Speed: 802.3u (10/100 Ethernet), Supports Wake-On-LAN Hardware Monitor: CPU Temperature Sensing Motherboard Temperature Sensing CPU Overheat Shutdown to Protect CPU Life (ASRock U-COP)(see CAUTION 3) CPU Fan Tachometer Chassis Fan Tachometer Voltage Monitoring: +12V, +5V, +3.3V, Vcore Future CPU Port:...
  • Seite 6 Although this motherboard offers stepless control, it is not recommended to perform over-clocking. Frequencies other than the recommended CPU bus frequencies may cause the instability of the system or damage the CPU. 6 6 6 6 6 ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 7: Cpu Installation

    Step 5. Install CPU fan and heatsink. For proper installation, please kindly refer to the instruction manuals of your CPU fan and heatsink vendors. 7 7 7 7 7 ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 8: Expansion Slots

    (Future CPU Port, PCI Slots and AGP Slot) (Future CPU Port, PCI Slots and AGP Slot) (Future CPU Port, PCI Slots and AGP Slot) There are 1 Future CPU Port, 4 PCI slots and 1 AGP slot on K8Upgrade-NF3 motherboard. Future CPU Port (Yellow-Colored Port):...
  • Seite 9 PCI Slots: PCI slots are used to install expansion cards that have the 32-bit PCI interface. AGP slot: The AGP slot is used to install a graphics card. The ASRock AGP slot has a special design of clasp that can securely fasten the inserted graphics card.
  • Seite 10: Installing An Expansion Card

    BIOS. If you need to clear the CMOS when you just finish updating the BIOS, you must boot up the system first, and then shut it down before you do the clear-CMOS action. ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com...
  • Seite 11 1.5 Gb/s data transfer rate. Serial ATA (SATA) Either end of the SATA data cable Data Cable can be connected to the SATA hard disk or the SATA connector on the motherboard. ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 12 USB 2.0 Header ASRock 8CH I/O accommo- dates 4 default USB 2.0 ports. If (9-pin USB67) those USB 2.0 ports on the I/O (see p.2 No. 18) panel are not sufficient, this USB 2.0 header is available to...
  • Seite 13 Failing to do so will cause power up failure. Game Port Header Connect a Game cable to this header if the Game port bracket (15-pin GAME1) is installed. (see p.2 No. 21) ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 14 SATA HDDs with RAID functions, please follow the below steps. STEP 1: Make a SATA Driver Diskette. Insert the ASRock Support CD into your optical drive to boot your system. During POST at the beginning of system boot-up, press <F11> key, and then a window for boot devices selection appears.
  • Seite 15 .. \ Nvidia SATA patch for Win98/ME Then the SATA HDD can be used in SATA 1 or SATA 2 port. Windows 98 SE / Windows ME does not support RAID function. ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 16 Main Menu automatically if “AUTORUN” is enabled in your computer. If the Main Menu does not appear automatically, locate and double-click on the file “ASSETUP. EXE” from the “BIN” folder in the Support CD to display the menus. ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com...
  • Seite 17 ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 18 ‘ ’ ™ ® ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 19 ® ® ‘ ’ ™ ‘ ’ ™ ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 20 ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 21 ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 22 ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 23 ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 24 “ ” SATA2 SATA1 ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 25 ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 26 ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 27 ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 28 .. \ RAID BIOS Setting Utility .. \ RAID Utility for Windows ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 29 ® ® ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 30: Einführung

    1. Einführung 1. Einführung 1. Einführung Wir danken Ihnen für den Kauf des ASRock K8Upgrade-NF3 Motherboard, ein zuverlässiges Produkt, welches unter den ständigen, strengen Qualitätskontrollen von ASRock gefertigt wurde. Es bietet Ihnen exzellente Leistung und robustes Design, gemäß der Verpflichtung von ASRock zu Qualität und Halbarkeit.
  • Seite 31 LAN: Speed: 802.3u (10/100 Ethernet), unterstützt Wake-On-LAN Hardware Monitor: Überwachung der CPU-Temperatur Motherboardtemperaturerkennung CPU-Überhitzungsschutz durch rechtzeitigen Systemshutdown (ASRock U-COP)(Siehe VORSICHT 3) Drehzahlmessung für CPU-Lüfter Drehzahlmessung für Gehäuselüfter Spannungsüberwachung: +12V, +5V, +3.3V, Vcore Future CPU Port: Unterstützt CPU-Aufrüstung von 754-poliger AMD-CPU auf 939-polige AMD-CPU oder zukünftige CPUs wie 940-polige...
  • Seite 32 8-channel modes. Please check the table on page 3 for proper connection. Obwohl dieses Motherboard stufenlose Steuerung bietet, wird Overclocking nicht empfohlen. Frequenzen, die von den empfohlenen CPU-Busfrequenzen abweichen, können Instabilität des Systems verursachen oder die CPU beschädigen. ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 33: Sicherheitshinweise Vor Der Montage

    Schritt 5: Installieren Sie einen aktiven CPU-Kühler, der die gesamte Fläche der CPU abdeckt und eine ausreichende Wärmeableitung für den von Ihnen verwendeten CPU-Typ bietet. Weitere Hinweise finden Sie der Installationsanleitung für Ihren CPU-Kühler. ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 34: Installation Der Speichermodule (Dimm)

    2.2 Installation der Speichermodule (DIMM) 2.2 Installation der Speichermodule (DIMM) 2.2 Installation der Speichermodule (DIMM) 2.2 Installation der Speichermodule (DIMM) Das K8Upgrade-NF3-Motherboard hat zwei 184-pol. DDR- (Double Data Rate) DIMM-Steckplätze. Achten Sie darauf, das Netzteil abzustecken, bevor Sie DIMMs oder Systemkomponenten hinzufügen oder entfernen.
  • Seite 35 Der Port für zukünftige CPUs ermöglicht Ihnen die Aufrüstung Ihrer 754-poligen AMD-CPU auf eine 939-polige AMD-CPU. Dies erreichen Sie durch die Installation eines zusätzlichen ASRock 939CPU-Board in diesem Port für zukünftige CPUs am K8Upgrade-NF3-Motherboard. In diesem Port für zukünftige CPUs können Sie das ASRock M2CPU-Board installieren, um Ihre 754-polige AMD-CPU in Zukunft auf eine 940-polige AMD-CPU (M2) aufzurüsten.
  • Seite 36: Einbau Einer Erweiterungskarte

    PCI-Slots: PCI-Slots werden zur Installation von Erweiterungskarten mit dem 32bit PCI-Interface genutzt. AGP-Slot: Der AGP-Steckplatz dient zur Installation einer Grafikkarte. Der ASRock AGP-Steckplatz hat speziell entwickelte Klammern, die die eingefügte Grafikkarte sicher festhalten. Stecken Sie KEINE 3,3V AGP-Karte in den AGP-Steckplatz dieses Motherboards! Permanente Beschädigung könnte die Folge sein...
  • Seite 37: Einstellung Der Jumper

    CMOS gelöscht wurde. Wenn Sie den CMOS- Inhalt gleich nach dem Aktualisieren des BIOS löschen müssen, müssen Sie zuerst das System starten und dann wieder ausschalten, bevor Sie den CMOS-Inhalt löschen. ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 38: Anschlüsse

    Diese beiden Serial ATA- (SATA-)Verbínder (SATA1: siehe S.2, Punkt 10) SATA1 SATA2 unterstützten SATA-Datenkabel (SATA2: siehe S.2, Punkt 11) für interne Massenspeichergeräte. Die aktuelle SATA-Schnittstelle ermöglicht eine Datenübertragungsrate bis 1,5 Gb/s. ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 39 Ende des SATA- Verbindung zum Netzteil Stromversorgungskabels mit dem Stromanschluss des Netzteils. USB 2.0-Header ASRock 8CH I/O (E/A) verfügt über 4 Standard-USB 2.0- (9-pol. USB67) Anschlüsse auf der Rückseite. (siehe S.2 - Nr. 18) Wenn die hinteren USB- Anschlüsse nicht ausreichen, steht dieser USB 2.0-Header...
  • Seite 40 (siehe S.2, Punkt 3) Anschluss für Beachten Sie bitte, dass Sie eine 12V-ATX-Netzteil Stromversorgung mit ATX 12- Volt-Stecker mit diesem (4-pin ATX12V1) Anschluss verbinden müssen, (siehe S.2, Punkt 2) damit ausreichend Strom ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 41 Windows XP 64-Bit auf Ihren SATA-Festplatten mit RAID-Funktionen installieren möchten. SCHRITT 1: Erstellen Sie eine SATA-Treiberdiskette. Legen Sie die ASRock Support-CD in Ihr optisches Laufwerk, um Ihr System hochzufahren. (Legen Sie zu diesem Zeitpunkt KEINE Diskette in das Diskettenlaufwerk ein!) Während des Selbsttests zu Beginn des Systemstarts drücken Sie die <F11>-...
  • Seite 42 Wenn Sie auf Ihren SATA-Festplatten lediglich Windows 2000, Windows XP oder Windows XP 64-Bit ohne RAID-Funktionen installieren möchten, ist das Anlegen einer SATA-Treiberdiskette nicht erforderlich. Außerdem brauchen Sie die BIOS- Einstellungen ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 43 ASSETUP.EXE im BIN-Verzeichnis der Support-CD, um die Menüs aufzurufen. Das Setup-Programm soll es Ihnen so leicht wie möglich machen. Es ist menügesteuert, d.h. Sie können in den verschiedenen Untermenüs Ihre Auswahl treffen und die Programme werden dann automatisch installiert. ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 44 1. Introduction Merci pour votre achat d’une carte mère ASRock K8Upgrade-NF3, une carte mère très fiable produite selon les critères de qualité rigoureux de ASRock. Elle offre des performances excellentes et une conception robuste conformément à l’engagement d’ASRock sur la qualité et la fiabilité au long terme.
  • Seite 45 Mesure de température de la carte mère Coupure du CPU en cas de surchauffe afin de protéger la durée de vie du CPU (ASRock U-COP)(voir ATTENTION 3) Tachéomètre ventilateur CPU; Tachéomètre ventilateur châssis Monitoring de la tension: +12V, +5V, +3.3V, Vcore Port Future CPU: Supporte une mise à...
  • Seite 46 Même si cette carte mère offre un contrôle sans souci, il n’est pas recommandé d’y appliquer un over clocking. Les fréquences autres que les fréquences de bus d’UC recommandées risquent de déstabiliser le système ou d’endommager l’UC. ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 47 Etape 5. Installez le ventilateur et le radiateur du CPU. Pour une installation correcte, reportez-vous aux manuels du fabricant du ventilateur et du radiateur de CPU. ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 48 2.2 Installation des modules mémoire (DIMM) 2.2 Installation des modules mémoire (DIMM) 2.2 Installation des modules mémoire (DIMM) La carte mère K8Upgrade-NF3 propose deux emplacements DIMM DDR (Double Débit de données) à 184 broches. Ayez bien le soin de débrancher l’alimentation avant d’ajouter ou de retirer des modules DIMM ou les composants du système.
  • Seite 49 Le future port du processeur permet une mise à jour de votre AMD de 754 pins à un AMD à 939 pins en installant une carte fille ASRock 939CPU sur ce port de la carte mère K8Upgrade-NF3. Vous pouvez installer la carte fille ASRock M2CPU sur ce port de la carte mère pour mettre à...
  • Seite 50 PCI 32 bits. Slot AGP: Le slot AGP est utilisé pour installer une carte graphique. Le slot AGP ASRock utilise un design de fermoir spécial qui permet de fixer correctement la carte graphique insérée. Ne PAS utiliser de carte AGP 3,3V AGP sur l’emplacement AGP de cette carte mère! Cela risque de causer des dommages irréversibles!
  • Seite 51 BIOS à jour. Si vous avez besoin d’effacer la CMOS lorsque vous avez fini de mettre le BIOS à jour, vous devez d’abord initialiser le système, puis le mettre hors tension avant de procéder à l’opération d’effacement de la CMOS. ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 52 SATA pour (SATA2: voir p.2 fig. 11) SATA1 SATA2 les périphériques de stockage internes. L’interface SATA actuelle permet des taux transferts de données pouvant aller jusqu’à 1,5 Go/s. ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 53 électrique SATA sur le connecteur d’alimentation de l’unité d’alimentation électrique. En-tête USB 2.0 L’ASRock 8CH I/O (E/S ASRock 8CH) vous fournit 4 ports USB (USB67 br.9) 2.0 par défaut situés sur le (voir p.2 No. 18) panneau arrière. Si les ports USB arrières ne sont pas...
  • Seite 54 électrique avec (ATX12V1 br. 4) prise ATX 12V sur ce (voir p.2 fig. 2) connecteur afin d’avoir une alimentation suffisante. Faute de quoi, il ne sera pas possible de mettre sous tension. ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 55 SATA avec fonctions RAID, veuillez suivre la procédure ci- dessous. ETAP 1: Créez une disquette pilotes SATA. A. Insérez le CD de soutien ASRock dans votre lecteur de disque optique pour démarrer votre système. (N’insérez AUCUNE disquette dans le lecteur de disquette pour l’instant!) B.
  • Seite 56 SATA. En outre, vous n’avez pas besoin de modifier les paramètres BIOS. Vous pouvez lancer directement l’installation de Windows 2000, Windows XP ou de Windows XP 64-bit directement sur votre système. ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com...
  • Seite 57 “AUTORUN” est activé dans votre ordinateur. Si le Menu principal n’apparaît pas automatiquement, localisez dans le CD technique le fichier “ASSETUP.EXE” dans le dossier BIN et double-cliquez dessus pour afficher les menus. ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 58 Grazie per aver scelto una scheda madre ASRock K8Upgrade-NF3, una scheda madre affidabile prodotta secondo i severi criteri di qualità ASRock. Le prestazioni eccellenti e il design robusto si conformano all’impegno di ASRock nella ricerca della qualità e della resistenza. Questa Guida Rapida all’Installazione contiene l’introduzione alla motherboard e la guida passo-passo all’installazione.
  • Seite 59 Sensore per la temperatura del processore Sensore temperatura scheda madre Chiusura automatica del processore in caso di surriscaldamento per proteggere la CPU (ASRock U-COP)(vedi ATTENZIONE 3) Indicatore di velocità per la ventola del processore Indicatore di velocità per la ventola di raffreddamento Voltaggio: +12V, +5V, +3.3V, Vcore...
  • Seite 60 ASRock 8CH I/O: 1 porta PS/2 per mouse, 1 porta PS/2 per tastiera 1 Porta seriale: COM 1 1 Porta parallela: supporto ECP/EPP 4 porte USB 2.0 già integrate 1 Porta RJ-45 Connettore Audio: cassa laterale / cassa posteriore /...
  • Seite 61 Quando la leva fa clic sulla linguetta laterale significa che è bloccata. Step 5. Installare la ventola del processore e l’heatsink. Per una corretta installazione, per favore fare riferimento ai manuali di istruzione dei produttori della ventola e dell’heatsink del processore. ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 62 2.2 Installazione dei moduli di memoria (DIMM) 2.2 Installazione dei moduli di memoria (DIMM) 2.2 Installazione dei moduli di memoria (DIMM) La motherboard K8Upgrade-NF3 mette a disposizione due slot DIMM DDR (Double Data Rate) da 184 pin. Scollegare l’alimentazione elettrica prima di aggiungere o rimuovere i DIMM o altri componenti del sistema.
  • Seite 63 (Porta CPU Future, Slot PCI ed Slot AGP) (Porta CPU Future, Slot PCI ed Slot AGP) (Porta CPU Future, Slot PCI ed Slot AGP) Sulla scheda madre K8Upgrade-NF3 c’è 1 porta CPU Future, 4 slot PCI ed 1 slot AGP. Porta CPU futura (Porta di colore giallo): La porta CPU futura consente di effettuare l’aggiornamento da AMD 754-Pin CPU a...
  • Seite 64 32-bit. Slot AGP: Lo slot AGP viene usato per l’installazione di una scheda grafica. Lo slot AGP ASRock usa uno speciale gancio che permette di fissare in sede in modo sicuro la scheda grafica. NON usare schede AGP da 3,3 V nello slot AGP di questa motherboard! Ciò...
  • Seite 65 BIOS. Se è necessario cancellare la CMOS una volta completato l’aggiornamento del BIOS, è necessario riavviare prima il sistema, e poi spegnerlo prima di procedere alla cancellazione della CMOS. ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 66 SATA per dispositivi di (SATA2: vedi p.2 No. 11) immagazzinamento interni. ATA (SATA) supportano cavi SATA per dispositivi di memoria interni. L’interfaccia SATA attuale permette velocità di trasferimento dati fino a 1.5 Gb/s. ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 67 SATA al connettore power dell’alimentatore. Collettore USB 2.0 Il dispositivo ASRock 8CH I/O mette a vostra disposizione 4 (9-pin USB67) porte USB 2.0 di default sul (vedi p.2 No. 18) pannello posteriore. Se le porte USB posteriori non sono sufficienti, è...
  • Seite 68 È necessario collegare una alimentazione con spinotto da (4-pin ATX12V1) 12V ATX a questo connettore (vedi p.2 item 2) in modo che possa fornire energia sufficiente. In caso contrario l’unità non si avvia. ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 69 SATA con funzioni RAID, seguire le istruzioni in basso. 1° PASSO: Creare un dischetto driver SATA. Inserire il CD di supporto ASRock nel lettore ottico prima di accendere il sistema. (NON inserire nessun dischetto floppy nel drive in questo momento!) Durante la fase di POST, all’inzio del boot-up del sistema, premere il tasto...
  • Seite 70 SATA senza funzioni RAID, non è necessario creare un dischetto driver SATA. Inoltre, non è necessario modificare le impostazioni del BIOS. È possibile iniziare l’installazione di Windows 2000, Windows XP o Windows XP 64 bit direttamente sul sistema. ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 71 Menù principale. Se il Menù principale non appare automaticamente, posizionarsi sul file ASSETUP. EXE nel CESTINO del CD di supporto e cliccare due volte per visualizzare i menù. ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 72 1. Introducción 1. Introducción Gracias por su compra de ASRock K8Upgrade-NF3 placa madre, una placa de confianza producida bajo el control de calidad estricto y persistente. La placa madre provee realización excelente con un diseño robusto conforme al compromiso de calidad y resistencia de ASRock.
  • Seite 73 Sensibilidad a la temperatura de la placa madre, Apago automático en caso de temperature sobre-elevada del procesador para proteger el procesador (ASRock U-COP)(vea ATENCIÓN 3), Taquímetros de los ventiladores del procesador y del chasis, Monitor de Voltaje: +12V, +5V, +3.3V, Vcore Puerto de CPU Future: Admite actualización de procesador desde el procesador...
  • Seite 74 Aunque esta placa base ofrece un control complete, no es recomendable forzar la velocidad. Las frecuencias de bus de la CPU distintas a las recomendadas pueden causar inestabilidad en el sistema o dañar la CPU. ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com...
  • Seite 75 CPU, examine su orientación o examine si los pins están ya encorvados. Paso 4. Encierre el zócalo bajando la palanca. Paso 5. Instale el disipador de calor con ventilador del CPU ( consulte la documentación del disipador de calor). ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 76 2.2 Instalación de Memoria 2.2 Instalación de Memoria 2.2 Instalación de Memoria La placa base K8Upgrade-NF3 proporciona dos zócalos DIMM DDR (Doble velocidad de datos) de 184 contactos Asegúrese de desconectar la fuente de alimentación antes de añadir o retirar módulos DIMM o componentes del sistema.
  • Seite 77 Puerto de CPU Future, ranuras PCI y ranuras AGP) Puerto de CPU Future, ranuras PCI y ranuras AGP) La placa madre K8Upgrade-NF3 cuenta con 1 puerto de CPU Future, 4 ranuras PCI y 1 ranuras AGP. Puerto de procesador futuro (puerto de color amarillo):...
  • Seite 78 Para instalar tarjetas de expansión que tienen 32-bit Interface PCI. Ranura AGP: La ranura AGP se utiliza para instalar una tarjeta gráfica. La ranura AGP ASRock tiene un diseño especial de seguro para fijar con seguridad la tarjeta gráfica introducida.
  • Seite 79 CMOS cuando acabe de finalizar la actualización de la BIOS, debe arrancar primero el sistema y, a continuación, apagarlo antes de realizar la acción de borrado de CMOS. ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 80 1.5 Gb/s. Cable de datos de Ambos extremos del cable serie ATA (SATA) pueden conectarse al disco duro SATA o la conexión de la placa base. ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 81 SATA a la conexión de alimentación de la fuente de alimentación. Cabezal USB 2.0 ASRock 8CH I/O le proporciona 4 puertos USB 2.0 (9-pin USB67) predeterminados en el panel (ver p.2, No. 18) posterior. Si los puertos USB posteriores no son suficientes, este cabezal USB 2.0 (USB67)
  • Seite 82 De lo contrario no se podrá encender. Conexión de juegos Conecte un cable de juegos a esta conexión si se instala el (15-pin GAME1) soporte del puerto de juegos. (vea p.2, No. 21) ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 83: Configuración Raid

    HDDs SATA con funciones RAID, por favor siga los pasos siguientes. PASO 1: Haga un Disquete de Controlador SATA. Inserte el CD de soporte de ASRock en la unidad óptica de la unidad para iniciar el sistema. (NO inserte ningún disquete en la unidad de disco en este momento) Durante la comprobación inicial (POST) del sistema, pulse la tecla <F11>...
  • Seite 84 HDDs SATA sin funciones RAID, no tiene que hacer un disquete de controlador SATA. Además, no necesita cambiar la configuración BIOS. Puede comenzar a instalar Windows 2000, Windows XP o Windows XP 64 bits en su sistema directamente. ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 85 Para iniciar la instalación, ponga el CD en el lector de CD y se desplegará el Menú Principal automáticamente si «AUTORUN» está habilitado en su computadora. Si el Menú Principal no aparece automáticamente, localice y doble-pulse en el archivo ASSETUP.EXE para iniciar la instalación. ASRock K8Upgrade-NF3 Motherboard Downloaded from www.Manualslib.com manuals search engine...
  • Seite 86 Downloaded from www.Manualslib.com manuals search engine...
  • Seite 87 Downloaded from www.Manualslib.com manuals search engine...
  • Seite 88 Downloaded from www.Manualslib.com manuals search engine...
  • Seite 89 Downloaded from www.Manualslib.com manuals search engine...
  • Seite 90 Downloaded from www.Manualslib.com manuals search engine...
  • Seite 91 Downloaded from www.Manualslib.com manuals search engine...
  • Seite 92 Downloaded from www.Manualslib.com manuals search engine...
  • Seite 93 Downloaded from www.Manualslib.com manuals search engine...
  • Seite 94 Downloaded from www.Manualslib.com manuals search engine...
  • Seite 95 Downloaded from www.Manualslib.com manuals search engine...
  • Seite 96 Downloaded from www.Manualslib.com manuals search engine...

Inhaltsverzeichnis