Part Name; User Information; The Correct Helmet Position; Adjusting The Single-Hand Twisting Fastener - Crivit Sp-Sim001 Bedienungsanleitung

Gravel & road bike helmet SP-SIM001
GB IE
Part name (Fig. A)
1. PC shell
2. Ventilation holes
3. Adjustment dial
4. Size adjustment system
5. Strap divider
6. Buckle
7. Chin strap
8. Inner pad

User information

1. The correct helmet position

• The helmet must always be levelly horizontal on your head (Fig. B).
• If the helmet is too far forward, it can impair your vision.
• If the helmet is too far back, your forehead is not sufficiently protected.

2. Adjusting the single-hand twisting fastener

The integrated size-adjusting system can be adjusted using a turning knob at the back of
one's head (Fig. C):
• smaller = twist clockwise • bigger = twist anti-clockwise

3. Adjusting the strap divider

• The strap divider (Fig. D) must be positioned in such a way, that the straps are taut but
comfortable. The strap divider must be below the ear, and the straps must not cover the ears.
6