Device Features - Lightmaxx LED COLOR Short Bar Bedienungsanleitung

Device Features

This is the latest version of our DMX LED COLOR BAR, which is equipped with 126 very bright
10mm RGB LEDs. Dip switches can be used to switch between the built-in programs. This includes a
sound-to-light mode as well as master/slave and DMX mode in different control configurations.
The device can mix colors as desired and is divided into three different sections for this function:
Color Fading, Color Chasing and Strobe. Of course, you can combine them to create different color
effects.
The LED COLOR BAR can be used in a number of different applications. But it is best suited for
creating a beautiful scene-background, e. g. on stage, in a club, bar or even at home.
Master / Slave
Switch dip-switch 10 to position „On" and all other switches to position „Off" to operate the device
as a slave. It will then follow the connected master device.
Stand-Alone
Switching the dip switches 9 and 10 to the „Off" position allows you to select from the built-in
programs with switches 1 to 4. The speed is then adjusted with switches 5 and 6. For a flash effect,
please use switches 7 and 8.
Sound-to-Light
Set the dip switch to the „On" position to activate this mode. The sensitivity of the instrument to
sound can be changed with switches 1 to 4.
DMX Control
Set the dip-switch 10 to „On" position and then use switches 1 to 9 to adjust the DMX address
settings. You can find the DMX chart on page 10
8