Revo superconnect Bedienungsanleitung Seite 35

SYSTEM SETTINGS
TIME / DATE
Found in the SYSTEM SETTINGS menu, this menu offers you the option
of changing a number of time/date related settings. The TIME/DATE
menu has three listings as follows:
SET TIME / DATE : Allows you to manually set the time/date.
AUTO UPDATE : Choose from three different automatic setting options.
SET FORMAT : Choose whether you would like to use 12hr or 24hr
formats.
Update from DAB :
Automatically takes time/date from DAB signal. SUPERCONNECT
needs to have been operated in DAB MODE (and have received a
signal) before this information can be extracted.
Update from Network :
Takes time/date from your internet connection.
CONTRAST
SUPERCONNECT allows a degree of control over the contrast of
its OLED display, meaning that both its STANDBY and POWER ON
contrast levels can be independently set to either HIGH, MEDIUM or
LOW brightness levels.
To change the contrast settings, press
followed by SYSTEM SETTINGS. Now select CONTRAST from the menu
list. You will now be able to modify the default brightness level
settings for the two modes of operation - STANDBY and POWER ON.
Select the mode you'd like to change from these two options, then
choose your desired brightness level. Your chosen settings will be
held in memory indefi nitely, but can be changed at any time.
then select MAIN MENU,
Time/Date
Set Time/Date
Auto update >
Set format
Set timezone >
Daylight savings
Auto update
Update from DAB
Update from Network *
No update
Brightness
Power-On Level *
Standby Level
35