Remove The Collection Cup - Ecolab Smartpower Rinse Dispenser Bedienungsanleitung

Servicing and maintenance
7.2.3

Remove the collection cup

Personnel:
Protective equipment:
Requirements:
n Front hatch open.
Fig. 13: Remove the collection cup
1. Press the collection cup
2.
Unscrew the fastening screws
3. Remove the collection cup by moving down and out of the unit.
MAN054125 Ver. 01-04.2024
n Operator
Protective eyewear
n
Chemical resistant protective gloves
n
Ä Chapter 7.2.2 'Opening the front hatch' on page 45
2
1
against the unit from below.
1
2
Before replacing, rinse the collection cup with clean water.
Drip tray
1
Fastening screw
2
.
46