Protective Gloves; General Information About Risks - Ecolab Smartpower Rinse Dispenser Bedienungsanleitung

Protective gloves

Protective gloves are used to protect the hands against friction, abrasions, cuts
or deeper injuries as well as when touching hot surfaces.
Safety shoes
Safety shoes protect feet against crushing, falling parts, sliding on slippery
surfaces and against aggressive chemicals.
2.7

General information about risks

Unauthorised access
DANGER!
Unauthorised access
The owner must ensure that unauthorised personnel are prevented from
accessing the operating area.
Hazard arising from automatic start-up
DANGER!
Automatic start-up poses a hazard in areas marked with the symbol opposite.
An automatic start-up can be initiated as soon as the power supply is
connected with no need to press a switch/button beforehand.
Risk of slipping
DANGER!
Risks of slipping are to be identified using the adjacent symbol.
Spilled chemicals are a slipping hazard in wet conditions.
WARNING!
Risk of slipping due to fluid in the operation and provisioning area!
– Wear non-slip, chemically resistant shoes when working.
– Place product containers in a tank to prevent a slipping hazard caused by
leaking fluids.
ENVIRONMENT!
Leaked, spilled metering media must be cleaned and disposed of correctly,
according to the instructions on the safety data sheet. It is essential to ensure
that the required personal protective equipment (PPE) is used.
17
Safety
MAN054125 Ver. 01-04.2024