Technical Data - Roco 40411 Handbuch

Important instructions:
▪ Digital decoders are modern high-quality electronic products and are to be treated with
special care:
▪ Coming into contact with fluids (e.g. oil, water, cleaning agents ...) place the decoder
at risk.
▪ Incorrect treatment with metallic objects (e.g. screwdriver, tweezers...) can cause
mechanical/electrical damage to the decoder.
▪ Rough treatment (e.g. pulling wire strands, bending components) can cause mecha-
GB
nical/electrical damage.
▪ Soldering work on the decoder can result in failures occurring.

Technical Data

Addresses:
Max. engine current / total load:
Function outputs (each and in total):
Dimensions:
The decoder is preset at Address 03 with operating in 28 driving stages and can be driven
and programmed in DCC and Motorola
Decoder protection:
▪ Temperature protection the decoder deactivates and the lights flash rapidly at 100°C.
▪ Short circuit monitoring of the motor and function connections.
1) RailCom is a registered trademark of the company Lenz GmbH, Giessen
2) Märklin is a registered trademark of the company Gebr. Märklin & Cie. GmbH, Göppingen,
Germany
3) Motorola is a registered trademark of the company Motorola lnc.,Tempe-Phoenix/Arizona
(USA)
10
8040411920 VI_2013.indd 10
1– 9999 (long DCC address)
1 A
0,8A each
20,0 x 11,0 x 3,5 mm
data format
3)
.
19.06.2013 12:42:18