Stopping The Machine; Maintenance, Storage And Troubleshooting - Ruris Rts5000 Electric Handbuch

EN
-When carrying a heavy load, pay special attention to the balance of the wheelbarrow, make sure the load is well
distributed and not tilted. If the load is tilted, it can lead to serious injury and damage, as the wheelbarrow may tip
over during starting, braking or driving on uneven roads
-If you are using the wheelbarrow on soft or uneven ground, reduce speed and pay special attention.
-Use low gear and throttle in position 1 on steep descents. Never use reverse gear when going downhill.
-Be extremely careful when starting, stopping or steering the wheelbarrow when working on slopes.
Loading conditions when the wheelbarrow is used on flat ground
-Maximum load = 500 Kg
-Maximum loading height * = 800 mm * from the bottom surface of the box
Loading conditions when the wheelbarrow is used on slopes
Maximum allowable slope = 15°
-Maximum load
200 Kg, For slopes < 10°
100 Kg, for slopes between 10° and 15°
-Maximum loading height (from the bottom surface of the tub)
300 mm for lowering
500 mm for climbing
5.5 Unloading the load
Before unloading, stop the wheelbarrow. Make sure there are
no people or other objects in the area that could be damaged
1. Press the tilt button forward, the hopper is automatically
lifted.
2. After the unloading is completed, press the tilt back button,
the hopper will return to its original position.

5.6 Stopping the machine

1. Emergency stop
Release the red lever (clutch lever) to brake and stop the bucket from tipping. The wheelbarrow will stop. Turn
the power switch to the OFF position.
Normal stop
Turn the ignition key to the OFF position.
Turn the power switch to the OFF position.
Caution Avoid sudden stops: this may cause the wheelbarrow/load to tip over (except in the case of an emergency
stop). Stop the wheelbarrow on a flat area.

8. MAINTENANCE, STORAGE AND TROUBLESHOOTING

Periodic maintenance and adjustments are necessary to keep the machine in good working order.
Attention! Stop the wheelbarrow before performing any maintenance. Before maintenance, wait for hot parts to
cool down. Use only original RURIS spare parts.
During maintenance work, wear personal protective equipment such as gloves, shoes, glasses.
Checking the wheels
We recommend lubricating the wheels every 100 hours of use.
9