Pre-Operation Checks; Instructions For Use; Features And Controls; Control Panel - Ruris Rts5000 Electric Handbuch

EN

6. PRE-OPERATION CHECKS

To ensure proper operation and maximum lifespan, it is necessary to perform some preliminary checks before
the work session:
- Battery: check the battery charge status using the display.
- Check the battery voltage, if the screws are tight or if there are any damaged parts.
- Check for dirt or debris on the machine.
- Tightening parts: check and tighten all parts.
- Transmission clutch lever: check if it is functional.
- Tub: check if it is blocked.
- Check the battery charge status. Charge it if necessary.

7. INSTRUCTIONS FOR USE

5.1 Features and controls

1. Tilting bucket
2. Work light

3. Control panel

4. Forward/reverse selector switch
5. Clutch lever
6. Toggle button
7. Rear wheel
8. Battery
9. Electric motor
10. Front wheel
Clutch control lever
Squeeze the control lever, clutch engaged.
Release the lever, clutch disengaged.
Toggle button
Controls the tilting of the tub.
Work light
You can turn on the work light when using the wheelbarrow.
Forward/Reverse Select Switch Controls the forward and
reverse direction, when in the "D" position, the wheelbarrow will
go forward, and when you press it to "R", it will go backward.
Rear wheel When you want to turn right or left, hold the handlebar firmly to control the rear wheels. The wheels
can be locked for forward and reverse movement.
5.2 Control panel
1.Power switch: Turn the knob to "ON" /
"OFF" position, the machine power will be
turned on/off. The electricity indicator will
be on, when the knob is in the "ON"
position.
2.Work light button
3.Lighting button on the control panel.
4. Gear selection button
5. Display .
6.Tub tilt button.
7. Safety key: Turn the wheelbarrow on/off
by turning the key to the ON/OFF position.
The images are for informational purposes only, the supplier reserves the right to make structural
and functional changes to the equipment presented in this manual.
7