Herunterladen Inhalt Inhalt Diese Seite drucken

Work Area Safety; Use And Maintenance - Ruris Rts5000 Electric Handbuch

Inhaltsverzeichnis
Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 158
EN
GENERAL SAFETY RULES
SAVE THESE SAFETY INSTRUCTIONS.
WARNING: Do not use this wheelbarrow until you have read this instruction manual and are familiar with the
safety, operating, and maintenance instructions.

WORK AREA SAFETY

• Never park the car in a place with unstable ground that could give way, especially when it is full.
• Keep the work area clean and well lit.
• Always hold the unit with both hands when using it. Keep a firm grip on the handlebars.
• Do not use power tools in explosive atmospheres, such as in the presence of fuel liquids, gases or vapors.
Power tools create sparks which may ignite the fuel gases or vapors.
• All persons, children and pets must remain at a safe distance from the work area.
• Do not allow children or untrained persons to use this machine.
• Do not expose power tools to rain or moisture. If water enters a power tool, the risk of electric shock will
increase.
• Do not handle the plug or the tool with wet hands.
Walk, don't run when using the wheelbarrow.
• On soft ground, drive in first gear forward/reverse. Do not accelerate quickly, turn or stop suddenly.
Never use the wheelbarrow on slopes with an inclination greater than 15°. When moving on a slope, whether
moving forward or backward, always make sure that the weight is evenly balanced. Always move in directions
parallel to the slope (up or down), to avoid danger, do not change gears on slopes.
• When tipping the load, the center of gravity will continuously change, and ground conditions will be essential
for the stability of the machine.
• Always wear safety glasses. Wear long pants, safety boots, and gloves. Do not wear loose clothing or jewelry
that can get caught in moving parts of the machine. Tie long hair above shoulder level to prevent it from getting
caught in moving parts.
• Do not expose the machine to rain, store it indoors.
• Do not operate in low light conditions.
• Keep all parts of your body away from any moving parts of the machine.
• Do not force the machine.
• Do not use the equipment barefoot or with sandals or inappropriate footwear. Wear protective footwear.
• Maintain a firm stance and balance when using the wheelbarrow.
• Do not use the tool if the switch is not functional.
• Do not use this product when you are tired, ill, or under the influence of alcohol, drugs, or medication.
• Use only original spare parts and accessories from the manufacturer. The use of any other parts may create a
hazard or cause damage to the product.
• Do not charge the battery tool in the rain or in a wet location. This will reduce the risk of electric shock.
• Battery-powered tools do not need to be plugged into an electrical outlet; they are always ready to go. Be aware
of potential hazards even when not using the tool or changing accessories.
• Disconnect the battery before servicing or cleaning the machine.
• Use only batteries recommended by the manufacturer.
• Do not dispose of batteries in fire, the cells may explode. Check local regulations for possible special disposal
instructions.
• Do not open or damage batteries. The released electrolyte is corrosive and can cause skin and eye irritation.
It may be toxic if swallowed.
• Do not place battery-powered tools or their batteries near fire or heat. This will reduce the risk of explosion.
• Do not crush, drop, or damage the battery. Do not use a damaged battery or charger.
• Do not point the tool at people or pets .
• When not in use, the wheelbarrow should be stored indoors in a dry, locked area out of the reach of children.
• Save these instructions. Refer to them frequently and use them to train others who may use this equipment.
• Do not use the wheelbarrow for any work other than that for which it is intended.

USE AND MAINTENANCE

• Check for misaligned or binding moving parts, broken parts, and any other damage that may affect the operation
of the machine. If damaged, repair the machine before using it.
• Do not force the power tool. Use the power tool correctly for your application.
3
Inhaltsverzeichnis
loading

Inhaltsverzeichnis