Starting The Machine - Ruris Rts5000 Electric Handbuch

EN

5.3 Starting the machine

Turn the power switch to the ON position. Make sure the transmission clutch is in the STOP position
(lever is up).
Turn the key to the ON position. Select the forward/reverse direction, then select the gear.
- Before starting work, check the operation of the brakes.
-To avoid losing control on steep descents, shift to LOW SPEED (throttle in position 1)
- Turns can be sharp. Make sure the load is securely fastened. Pay special attention when turning on slopes.
- Never change gear while the wheelbarrow is moving.
-Change gear when the engine is running and the clutch lever is disengaged.
5.4 Transporting the load
To avoid accidents or tipping:
-Respect the indicated safe load limits
-Do not position the load in such a way that it unbalances the center of gravity of the machine. Pay attention to
the height of the load. Pay attention to the width of the load.
-Make sure that the load does not protrude from the walls of the tub.
-Make sure the load does not reduce the operator's visibility.
-Secure the load with strong ropes or straps, using the fastening hooks. Do not attach the ropes to other parts of
the machine.
8