ripcurl FUNCTION. PRE-PROGRAMMED TIDE WITH TIMER, CHRONOGRAPH, ALARM, LIGHT, DST, POWER SAVE Handbuch Seite 2

English
Function. Pre-Programmed Tide with Timer, Chronograph, Alarm, Light, DST, Power Save
Display
LIGHT
MODE (SET)
Set Time & Date
1. Ensure you are in TIME mode
2. HOLD MODE in for 2 seconds
3. Push UP to increase. Push DOWN to decrease.
Push MODE to set
4. Advance through HOUR, MINTUTE, SEC-
ONDS, YEAR, MONTH, DAY/DATE, DATE
FORMAT, 12/24hr & FEET or METERS
Set Tide
1. Push the MODE button to view menu. Use UP
& DOWN buttons to scroll to TIDE menu, push
MODE to select Tide Mode
2. Wait for Beach Name to stop scrolling, then
hold MODE for 3 seconds to enter beach setting
3. Use UP & DOWN to toggle through Regions,
Country & Beach, once found correct field push
MODE to set .
Tip: At the start and end of DST season you must
use the DST function as it corrects the current
time, and tide to be DST correct.
Daylight Savings Time (DST)
1. Ensure you are in TIME mode
2. HOLD the UP button for 5 seconds and your
watch will automatically adjust to Daylight Sav-
ings Time. DST icon will appear in the bottom left
corner.
UP (START/STOP)
DOWN (LAP/RESET)
Chronograph (Stopwatch)
1. Push MODE and toggle UP/DOWN until you
see CHRONO, push MODE to select Chrono
Mode
2. Push UP to START/STOP
3. Push DOWN to time LAPS while the chrono-
graph is running
4. To reset the Chrono, stop Chrono by pushing
UP, then hold DOWN for 3 seconds
Timer (Countdown Setting)
1. Push MODE and toggle UP/DOWN until you
see Timer, push MODE to select Timer Mode
2. Push UP to start or stop the timer
3. Stop timer by pushing UP and hold DOWN for
2 seconds to reset timer
Adjusting Timer
1. Hold MODE for 3 seconds, the hour digit will
flash, use UP & DOWN to select hour you want
and push MODE to set
2. Repeat process for minutes and push MODE
to set
Alarm
1. Push MODE and toggle UP/DOWN until you
see Alarm, push MODE to Select Alarm Mode
2. Hold MODE for 3 seconds to enter alarm
setting, the hour digit will flash. Use UP/DOWN
to select hour you want, push mode to set
3. Repeat process for minutes and push MODE
to set alarm
4. Push UP/DOWN to turn the alarm icon (
on or o
Power Save
In TIME mode push DOWN for 10 seconds to turn
o your watch. Press any button to wake up
)