Getting Started; Making A Phone Call; Deactivating The Microphone (Mute); Memory Numbers - Topcom Fidelity 1000 Benutzerhandbuch

6 Buttons
(See picture 1 and 2 on folded cover page)
1. Hook Switch
2. Memory button register
3. Direct Memory buttons (M1-M3)
4. Program button
5. Memory button
6. Flash button 'R'
7. Redial / Pause button '
8. Alphanumerical key pad
9. Ringer LED
10. Mute LED
11. Mute button '
12. Wall mounting hook
13. Line cord connector
14. Ring Volume switch
15. Pulse / Tone switch
16. Flash time switch
17. Wall mounting locations
18. Ringer
19. Cable slots
7 Installation
Connect one end of the line cord to the telephone
line wall socket and the other end to the bottom of
the phone (13).
8

Telephone settings

8.1

Ringer volume

The ring volume can be adjusted by means of
the Ring Volume switch (14) at the bottom of the
phone.
8.2 Dialling mode (Tone/Pulse)
The dial mode can be selected by the Pulse/Tone
switch (15) on the button of the phone
8.3 Flash time
Press to use certain services as 'Call Waiting'
R
(if this service is provided by your telephone com-
pany); or to transfer phone calls when you are
using a telephone exchange (PABX).
The flash time can be selected by the switch (16)
on the bottom of the phone (100/300ms).
Topcom Fidelity 1000
P'
'
9

Getting started

9.1

Making a phone call

Pick up the handset.
Enter the telephone number.
9.2 Deactivating the microphone
(mute)
During conversation
You can now talk freely without the
caller hearing you.
9.3 Redial
To redial the last dialled number.
Pick up the handset.
The telephone number will be dialled
automatically.

10 Memory numbers

You can program 3 Direct and 10 Indirect Memory
Numbers (max 16 digits).
10.1 Adding a number to a Memory
Pick up the handset.
Press the program button.
Enter the telephone number.
To confirm.
Press the desired Direct Memory
M?
(M1-M3).
Or
Press the desired indirect memory
number (0-9).
To confirm.
Topcom Fidelity 1000
5