Additional Information; Explanation Of Wireless Setup Windows - Sony TDM-NC1 Bedienungsanleitung

Additional Information

Explanation of wireless
setup windows
Configure the unit to communicate on your
wireless LAN network.
For how to display the wireless setup windows,
see page 18.
Basic setup window
You can make the basic network settings here.
1Select an IP address acquisition method
from the pull-down menu.
To acquire it from the DHCP server automatically,
select [Auto (DHCP)]. To enter it manually, select
[Manual (Static IP)].
Tip
If your wireless LAN router supports DHCP, select
[Auto (DHCP)].
2When you select [Auto (DHCP)] in 1, setup
is automatically completed.
When you select [Manual (Static IP)], you need to
enter appropriate values by yourself.
Tips
• When you select [Auto (DHCP)], you cannot change
the assigned values.
• When you select [Manual (Static IP)], see the
operating instructions for the values to be entered.
• Enter decimal numbers from 0 to 255 for an IP
address.
3The MAC address of the unit is displayed.
4The My Name of the unit is displayed.
The name you set on the unit appears. You can also
edit/change the name here.
Tip
You can assign a name to the unit. The name appears
in M-crew Server.
5Cancel the settings.
6Click the button to confirm the set values.
If any of the set values is incorrect, a window
appears.
Click [Setup] to show the set values. Correct them if
necessary.
Wireless LAN setup window
You can make wireless LAN settings here.
1
2
3
4
5
6
1Enter the network name (SSID) of the
wireless LAN router.
Be sure to enter the one used for your wireless LAN
router.
"SSID" is an ID used to identify a wireless network.
2From the pull-down menu, select the
security mode for your wireless LAN router.
Select one of the following;
No security
WEP 64bits
WEP 128bits
WPA (TKIP)
WPA (AES)
WPA2 (TKIP)
WPA2 (AES)
3Enter a security key when you select [WEP
64bits] or [WEP 128bits] in 2.
Select the security key number and enter the
security key for your wireless LAN router.
Enter either characters or hexadecimal numbers for
the security key.
The security keys should be arbitrary characters and
numbers.
The length of the security keys differs depending on
the security mode you select. See the table below.
1
2
3
4
5
6
GB
37