Standby Mode - Yamaha SRT-1000 Bedienungsanleitung

Playing back audio from a
unit
1
With the unit turned on, press the BLUETOOTH key on the supplied
remote control to select
The BLUETOOTH indicator on the front panel lights up in green.
Lights up
2
Turn on the function of the device.
When connection is made correctly, the BLUETOOTH indicator of the
unit flashes 3 times.
Flashes 3 times
3
Play back a song on the device.
NOTE
• Perform connection with the device and unit within 10 meters (33 ft) of each other.
• It may be necessary to select "SRT-1000 Yamaha" in the
connection problem occurs. You may have to change the output setting to output audio to the unit,
depending on the device you are using.
• Adjust the volume level of the device as required.
• If a device is already connected to the unit, terminate that
with the new device.
Terminating connection
connection is terminated in the following cases. When the unit is turned on
and the connection is terminated, the BLUETOOTH indicator flashes once.
• The function is turned off on the compatible device.
• The BLUETOOTH key is pressed for more than 3 seconds.
• The unit is turned off.
device on the
as the input source.
device list again, in the event that a
connection, then connect
Using the

standby mode

The standby mode allows you to turn on (or off) the unit automatically, that
interlocked by the operation of the
1
With the unit turned on, hold down the BLUETOOTH STANDBY key
for more than 3 seconds.
Holding down the BLUETOOTH STANDBY key for 3 seconds each time toggles the
mode between enabled and disabled.
When the standby mode is enabled and the unit is turned off, the
STATUS indicator lights up in red. (
Lights up (red)
Functions available on devices with
Power on interlock function (when the unit is turned off)
When connection is made on the device, the unit will turn on and will be ready to play back
sound from the device.
Power off interlock function (when the unit is turned on)
The unit will be turned off when connection is terminated on a
BLUETOOTH is selected as the input source.)
Using the HOME THEATER CONTROLLER application
By installing the dedicated free application "HOME THEATER CONTROLLER" to a
device, such as a smartphone, you can perform various operations easily and
conveniently with the device.
(Setting items: basic operation, surround mode, sound adjustments)
For details on "HOME THEATER CONTROLLER," see the product information on our
website.
device.
Flash 3 times (enabled), flash once (disabled)
standby)
standby mode enabled
device. (Only when
13