Yamaha SRT-1000 Bedienungsanleitung Seite 22

Problem Cause
Cannot make the is not selected as the
input source.
unit paired with
the
A
device.
want to pair with the unit has a
password other than "0000."
The unit and device are too far
apart.
There is a device (microwave
oven, wireless LAN, etc.) outputs
signals in the 2.4 GHz frequency
band nearby.
Another
connected.
Cannot make a Another
connected.
connection.
More than nine devices are paired
and the oldest pairing information
is deleted.
No sound is The
unit with the device is
produced or the
disconnected.
sound is
interrupted
is not selected as the
during playback.
input source.
The unit and device are too far
apart.
There is a device (microwave
oven, wireless LAN, etc.) outputs
signals in the 2.4 GHz frequency
band nearby.
The device is not set to send
audio signals to the
unit.
Playback on the device has not
been performed.
The device's volume is set to
minimum.
20
Remedy
Select as the input source.
adaptor, etc., that you Use a adaptor, etc., whose
password is "0000."
Move the device closer to the unit.
Move this unit away from the device
that is emitting radio frequency
signals.
device is Terminate current
connection, and perform pairing with
the new device.
device is The unit cannot make multiple
connections. Terminate
current connection, and
make connection for the desired
device.
Perform pairing again. The unit can
retain pairing information for up to
eight devices. When pairing a ninth
device, the oldest pairing information
will be deleted.
connection of the Perform connection
operations again (p.13).
Select as the input source.
Move the device closer to the unit.
Move this unit away from the device
that is emitting radio frequency
signals.
Change the audio output setting and
connection setting on the device.
Perform playback on the device.
Turn up the volume level.