Configuring Hdmi Audio Output; Setting The Auto Power Standby Function - Yamaha ESB-1080 Bedienungsanleitung

Configuring HDMI audio output

Select the device from which audio input via the unit's HDMI IN jack
will be played when the HDMI control function is disabled. HDMI
audio is output from this unit by default.
The unit (default) Play HDMI audio input signal from the unit.
TV Play HDMI audio input signal from the TV.
1
2
HDMI audio output switches between the unit and the
TV, and the unit turns on. The indicator shows HDMI
audio output status for several seconds immediately
after the unit is turned on.
Glows (audio is played from the unit;
default)
Off (audio is played from the TV)
38

Setting the auto power standby function

Enabling the auto power standby function prevents the unit from
remaining on when not in use. When the auto power standby
function is enabled, the unit automatically turns off in any of the
following situations.
• No operations for 8 hours
• No audio input and no operations for 20 minutes when Bluetooth
or HDMI is selected as the input source.
1
2
The auto power standby function is enabled or disabled.
The indicator shows auto power standby function status
for several seconds immediately after the unit is turned
on.
En
Glows (disabled)
Off (enabled)