Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1 2 3 4
a
Installation
Place the unit on a flat surface. When installing this unit on a rack behind which there is limited space, for example, it may be easier to connect external devices to this unit first. See
page 8 for information regarding the connection of external devices.
Notes
• Be sure to install this unit on a large, stable stand where it does not fall subject to vibrations, such as from an earthquake, and where it is out of the reach of children.
• The unit's speakers are not magnetically shielded. Do not install hard disk drives or similar devices near the unit.
• Do not stack the unit directly on top of other playback devices, or vice versa. Heat and vibrations may result in damage or malfunction.
Recommended place for installation
• Do not install the unit near a corner of the
room.
• The unit can be mounted on a wall. See
page 14 in the Owner's Manual.
• When raising the antenna (p. 7), position the
unit so that the antenna does not obstruct
the TV screen.
• The listening position (such as sofa, etc.)
should be located at the front of the unit.
• The distance between the listening position
and the unit should be more than 2 m (6.6 ft).
6
a Installation
En
Position the unit and TV so that they are separated
by at least 5 cm (2").
Use the TV Remote Repeater function if the unit
obstructs the remote control sensor on the TV.
See page 58 in the Owner's Manual.
To achieve the optimal surround sound
effects, be sure that obstacles such as
furniture may not obstruct the path of
sound beams (p. 7).
Werbung
Inhaltsverzeichnis
