Yamaha YSP-1600 Kurzanleitung Seite 10

1 2 3 4
4
Select the network (access point) of which you want to share the
settings with the unit.
iOS (an example of English version)
• You can use this function to connect to a wireless network at any time by selecting "Share Wi-Fi Settings
(iOS)" from the setup menu. However, be aware that if a different wireless network, or a Bluetooth device,
has already been configured, doing so will erase any previous settings.
10 c Surround sound effect for the installation position
En
Tap here to start setup
The network currently selected
The name of the unit
c
Surround sound effect for the installation
position
The surround sound is achieved by reflecting the sound beams off walls as shown in
the illustration below. For optimum surround effect, turn on the unit and select the
POSITION key according to the installation position of the unit.
1
Hold down the POSITION key that corresponds to the installation
position of the unit for more than 3 seconds.
The indicators on the front panel flash according to the set position.
Left
Center
Right
L (Left) C (Center; default setting)
Left side of room
R (Right)
Center of room Right side of room