Renkforce 1000562 Bedienungsanleitung Seite 72

Use the buttons „2" and „8" to switch between „Disable" (automatic recording
disabled), „ONCE" (record once on a special date) and „WEEKLY" (weekly repetition
of the set period, e.g. Monday to Wednesday).
Use the buttons „4" and „6" to switch the respective active input item (marked red);
the buttons „2" and „8" change the respective value.
At the very right, you can switch between „CONT" (continuous recording) and „MO-
TION" (recording at motion detection). The digital recorder either continually records
in the set period of time, or only when a motion is found in the surveillance area.
Push this button „
If the message „Time Conflict, try again!" appears, the date or time input for automatic
recording has caused a conflict, i.e. an overlap or wrong input. This may happen, e.g.
if the start time/date is before the current time/date.
• Push the button „MENU/ESC" on the digital recorder or the button „MENU" or „ESC"
on the IR remote control repeatedly to return to the respective previous menu or leave
the OSD menu.
72
" to terminate the settings.