Operation
1. Before use, carefully check if the appliance is without damage. Contact
your supplier if you find damage or problem, and don't use the appliance.
2. Remove all packaging and protective material.
3. Place the appliance on a stable and level platform.
4. Leave sufficient space around the appliance for ventilation.
5. Place the paper filter on the funnel of the appliance.
6.Open the flip cover of the water reservoir.
7. Fill the decanter with cold water and then pour the water into the water
reservoir. The capacity of the water reservoir is 1.8 L. Please avoid it to be
overflow.
8. Close the cover and leave the appliance for 1 minute to let the air come
out.
9.Put the decanter on the warming plate under the funnel.
10. Connect the power plug to the power socket.
11.Add 80-95 grams of coffee powder into the paper filter and slide the
funnel into position.
12.Switch the power ON, the "Indicator" will light up.
13.After a while, hot water starts dripping into the decanter.
14.When the "Indicator" light turns off, the brewing cycle is complete.
15.The bottom warming plate will remain functional after the brewing
process is completed.
16. Please remember to switch off if the decanter is picked up.
17.When you pick up the decanter, remember to hold its handle, the hot
surface is harmful to your hand, and avoid touching the warming plate.
ON/OFF switch button
---
-heat up the water
- 5 -