Connecting To An Av System - Sony TDM-BT10 Bedienungsanleitung

Connecting to an AV system

1
Connect the DIGITAL MEDIA PORT cable of this unit to the
DIGITAL MEDIA PORT (DMPORT) jack of an AV system.
Make sure the AV system is turned off before connecting.
To DIGITAL
MEDIA PORT
jack
This unit

Turn on the AV system connected to this unit, and select
the DIGITAL MEDIA PORT function.
The indicator lights up for 2 seconds to indicate "Ready. "
For details on how to select the DIGITAL MEDIA PORT function,
refer to the operating instructions supplied with the AV system.
Connect the cable so that both  marks
are aligned. To remove the DIGITAL
MEDIA PORT cable from the DMPORT
jack, press both side buttons and pull
it out.
AV system
7
GB