Operation - Zibro P 122 Bedienungsanleitung

C

OPERATION

1
2
3
4
56
IMPORTANT
The flexible exhaust hose can be extended from 600 to 1500 mm for
mounting. This length has been designed especially according to the
specifications of the air conditioner. Do not use an extension or
exchange for a different hose as that may lead to malfunctioning. The
exhaust air must flow freely, any blockage can lead to overheating of
the air conditioner. Take care to prevent any bow or bend in the exhaust
hose.
Insert the plug into the wall outlet.
Press the -button to switch on the air conditioner.
With -button you can change the operating mode of the unit.
By pressing the -button the following modes appear:
Cooling, the green light lits.
Dehumidifying, the orange light lits.
Air circulation, the yellow light lits.
COOLING
When the unit is in the cooling mode, the following functions apply:
• The fan speed can be adjusted by pressing the
Maximum setting.
Medium setting.
Lowest setting.
• The temperature can be set by pressing the
between 16°C en 32°C. The display will show the set temperature for 15
seconds and the "set temp" will light up. Fifteen seconds after setting the
required temperature, the display will show the room temperature.
It depends on the environment whether the required temperature will
be reached. It is not a malfunction of the air conditioner if the room
temperature remains above the "set temp".
-button
and buttons, anywhere