Zibro P 122 Bedienungsanleitung Seite 55

ATTENTION!
• Never use the device with a damaged power cord, plug, cabinet or
control panel. Never trap the power cord or allow it to come into
contact with sharp edges.
• Never seal the room - where this device will be used - completely
airtight. This will prevent under pressure in this room. Under
pressure can disrupt the safe operation of geysers, ventilation
systems, ovens, etc.
• Failing to follow the instructions may lead to nullification of the
guarantee on this device.
B
INSTALLATION
WARNING
Before using the air conditioner it should be left in an upright position
for at least 2 hours.
This unit is portable and can easily be moved from one room to another. In doing
so keep this in mind:
Ensure that the unit is positioned upright and on a level surface.
1
Place the loose filters in the filter holder.
2
• Take the filter holder
• Open the filter holder and place the active carbon filter (black) and 3M
Filtrete TM filter (white) in the filter holder
• Place the filter fixing component back in the holder.
• Place the filter holder back in the air conditioner.
Do not operate the unit inside the bathroom, shower, or in any other very
3
humid environment.
Please keep a distance of 50 cm between the unit and the wall or other
4
objects to ensure proper air circulation.
Insert both ends of the air exhaust hose µ in the round connectors
5
the connectors by turning them clockwise onto the hose.
Insert one round connector
6
to the window air outlet ¸.
connector
Ensure that the window air outlet ¸ has a free flow outside. Close the
7
window or door as much as possible to prevent outside air from entering the
room.
out of the air conditioner
.
in the backside of the unit
TM
. Fasten
. Fasten the other
4
55