Displaying The Information Of A Text Disc In Other Languages; Locating A Specific Track - Sony SCD-XE670 Bedienungsanleitung

Using the Display (continued)
Notes
• The display may not show all the characters,
depending on the disc.
• This player can display only the disc name, artist
name, and track names from TEXT discs. Other
information cannot be displayed.
Displaying the information of
a TEXT disc in other
languages
You can change the displayed language if the
TEXT disc has multi language capacity. When
the player detects such a TEXT disc, "TEXT"
and "MULTI" appear in the display. Change
the language according to the procedures
below.
1
Press MENU in stop mode.
2
Turn lAMSL until "LANGUAGE"
appears in the display.
3
Press lAMSL.
The current selected language (English,
French, German, etc.) flashes.
If the player cannot display the language
used in a TEXT disc, "Other Lang" appears
in the display.
4
Turn lAMSL until the desired
language appears in the display.
5
Press lAMSL.
After a few seconds, the information
appears in the selected language.
14
GB

Locating a Specific Track

During stop or play mode, you can locate any
track to be played.
To locate You need to
Turn lAMSL clockwise
The next or
succeeding until you find the track. When
using the remote, press >
tracks
repeatedly until you find the
track.
Turn lAMSL
The current
counterclockwise until you find
or preceding
tracks the track. When using the remote,
press . repeatedly until you
find the track.
Turn lAMSL until you
A specific
find the track number you want.
track directly
When using the remote, press
. or > repeatedly until
you find the track.
Locating a track directly by
entering the track number Z
Press the number button(s) to enter the
track number.
z To enter a track number over 11
1
Press >10.
2
Enter the corresponding digits.
To enter 0, press 10/0 instead.
Examples:
• To play track number 30, press >10, then
3 and 10/0.
• To play track number 100, press >10
twice, then 1, and 10/0 twice.