Turning Off The Information In The Display; Displaying The Information Of A Text Disc In Other Languages; Replacing Discs While Playing A Disc; Ex-Change - Sony SCD-CE595 Bedienungsanleitung

Turning off the information in
the display
Press DISPLAY MODE on the remote.
Each time you press the button while playing a
disc, the display turns off and on alternately.
Even when the display is turned off, it will turn
on when certain buttons are pressed, and then
turn off again after a few seconds.
Before you start playing, when you press the
button to turn off the display, "DISP OFF"
appears, and when you press the button to turn
on the display, "DISP ON" appears.
Displaying the information of
a TEXT disc in other
languages
You can change the displayed language if the
TEXT disc has multi language capacity. When
the player detects such a TEXT disc, "MULTI-
TEXT" appears in the display. Change the
language according to the procedures below.
1
Press MENU on the player.
2
Turn l AMS L (or press ./>
on the remote repeatedly) until
"LANGUAGE" appears in the display.
3
Press l AMS L (or ENTER on the
remote).
The current selected language (ENGLISH,
FRENCH, GERMAN, etc.) flashes.
If the player cannot display the language
used in a TEXT disc, "OTHER LANG"
appears in the display.
4
Turn l AMS L (or press ./>
on the remote repeatedly) until the
desired language appears in the
display.
5
Press l AMS L (or ENTER on the
remote).
After a few seconds, the information
appears in the selected language.
GB
12
Replacing Discs While
Playing a Disc

— Ex-Change

You can open the disc tray while playing a disc
so that you can check what discs are to be played
next and replace discs without interrupting play
of the current disc.
1
Press EX-CHANGE on the player.
The disc tray opens and two disc
compartments appear. Even if the player is
playing a disc, it does not stop playing.
2
Replace discs in the compartments
with new ones.
The player plays the disc on the left side
compartment after the current disc, and then
the one on the right side compartment.
3
Press DISC SKIP (or DISC SKIP +/– on
the remote).
The disc tray turns and other two disc
compartments appear.
4
Replace discs in the compartments
with new ones.
5
Press EX-CHANGE on the player.
The disc tray closes.
Note
Do not push the disc tray to close it in Step 5, as you
may damage the player.
While the disc tray is open by pressing EX-
CHANGE on the player
• If the play of the current disc ends, the player stops
playing. If the disc is played in 1DISC Repeat Play
mode (page 13), the current disc starts playing again.
• In ALL DISCS Shuffle Play mode (page 14), tracks
are reshuffled on the current disc.
• In Program Play mode (page 14), only the tracks on
the current disc are played.