i-tec USB-C Dual Display MST Docking Station Gebrauchsanweisung Seite 4

3. 1x Audio 3.5 mm Jack – for headphones and microphone 2.1
4. ON / OFF switch – for the docking station switching on/off
Rear panel:
5. Power supply input (DC 20V/5A, max. 100W) – power from an external power adapter
6. 1x USB-C (support for data, Display Port Alt mode, Power Delivery Alt mode) - for connecting of
the docking station to notebooks, tablets, PCs or smartphones with the USB-C port; Power
Delivery with profile 4 (max. 60 W)
7. 1x Display port (DP) – for connecting of the monitor with a DP input
8. 1x HDMI port – for connecting of the monitor with a HDMI input
Note to the graphical interface:
One monitor: 1x HDMI max. resolution 3840x2160 / 30Hz or 1x Display Port max. resolution
3840x2160 / 30Hz. Two monitors (MST): supports up to 1920x1200 / 60Hz. Modes: Extend,
Mirror and Primary monitor. 16 / 32 bit colour support.
9. 1x Ethernet GLAN RJ-45 port – for connecting to an Ethernet network / router / switch / hub
and the Internet
10. 2x USB-A 3.0 port (data transfer rate up to 5 Gbps ) – for connecting of USB devices
SYSTEM REQUIREMENTS
Hardware requirements: Requires a USB-C interface with support for the "DisplayPort Alternate
Mode" and "Power Delivery" (not all devices/systems with USB-C have this standard) or
Thunderbolt 3 port – now Windows 10 32/64bit, Mac OS X, Chrome OS and Android 6 (Google)
with Intel Broadwell Processors and R51 and higher
Operating system: Windows 10, Mac OS X, Google (Chrome OS and Android 6) with latest updates
Note: Mac OS does not support MST (2 monitors in the extended mode). No USB-C docking
station supports transmission of 2 monitors in Mac OS. Dual Display transmission to be
supported by Thunderbolt 3 docking station only.
INSTALLING DRIVERS
Once connected, the drivers for the docking station are automatically installed from the system. In
the case of the need to install LAN, download the latest drivers from our web site www.i-tec-
europe.eu in the tab "Download" for this product.