RUSTA PRO SENSOR Gebrauchsanweisung Seite 13

2. Turn down to open the outlet cover.
3. Remove the HEPA filter and clean it.
4. Install it back in reverse order.
MOTORIZED FLOOR BRUSH
NOTE:
1. To avoid affecting the normal operation of the brush, when the roller brush
and wheels are tangled or dusty, clean and maintain them.
2. When disassembling the brush, please make sure that the device is turned off.
1. Press the brush release button and remove the motorized floor brush from
the extension tube.
2. Press and hold the button and turn the end cover upwards.
13