Assembly Instruction - Rusta Pro Sensor Gebrauchsanweisung

ASSEMBLY INSTRUCTION

NOTE: Ensure free air flow by removing large particles (such as paper, cloth
and etcetera) from the tube.
• Fit required nozzle to the attachment point.
• Ensure the battery is fully charged.
USE
1. Press "Power button" to turn on or turn off the device
2. Press "Mode button", to set mode, it cycles in AUTO/HIGH/LOW-mode.
Continue to press mode button until desired mode is chosen.
Usually high mode is for carpet, low mode is for hard floor. If you choose auto mode,
the IQ Sensor detects the amount of dust and automatically adjusts the suction power.
CARE AND CLEANING
DUST CONTAINER
TIPS! To keep the suction power of cleaner,
please clean the dust in it regularly.
1. Press the dust container bottom lid
release button, open the bottom
cover and release dust.
Battery indicator level
Mode
Power button
Mode button
Press
Press
11