Setting An Additional Recording Start/End Time - Loewe Sl7 Erweiterte Bedienhinweise

Loewe bild | Extended operating instructions

Recording
Standby recording
When you press button to turn off the TV while recording is in progress, a menu appears asking you to confirm the next action:
[Cancel] – Return to watching TV and continue recording.
[Power Off] – The TV turns off and the recording stops. The recording up to this point is saved to a storage drive.
[Standby recording] – The TV turns off, and recording continues in the background.
If you have scheduled recording for a time when the TV is turned off, recording will start even if the TV is in standby mode. The TV will remain
in standby mode, and you can recognize a recording in progress by the red LED on the bottom of the TV.
Note: Never unplug the TV from the power outlet while recording. You may lose the recorded content or damage the storage drive!

Setting an additional recording start/end time

It is possible to start the scheduled recording earlier or end the recording later to compensate for possible programme delays caused by
commercials.
Press the button to open the menu and select [Settings] -> [Advanced Settings] -> [DR+ and Time Shift]. Edit these 2 items to define
the recording start/end time extension:
[Start in advance] – In the case of scheduled recording, here you can set the time by which the recording starts earlier.
[Delay Ending] – Set the amount of time by which the scheduled recording will be extended. Due to commercials, the recorded content
may end later than the time shown in the program guide. The additional recording time will ensure that all requested content is recorded.
Solving recording conflicts
When setting up a new scheduled recording, you may run into a conflict when the time of the new recording partially overlaps with another
saved scheduled recording. In this case, an information screen will be displayed. Since the TV can only record from one channel at a given
time, this conflict needs to be resolved by deleting the old or new scheduled recording.
[See Conflict details] – Displays information about conflicting scheduled recordings. Press the
[Cancel] – The new scheduled recording is discarded, and existing scheduled recording is retained.
[Save] – The existing scheduled recording is discarded, and new scheduled recording is saved.
Recording control panel
During recording, you can call up the recording control panel by pressing the
by the red LED light on the bottom of the TV.
You can use the arrow keys and the OK button to select and confirm the options in the control panel.
Press the button to hide the control panel. Please note that hiding the panel does not stop the recording.
- Rewind the recording. Press this button multiple times to change the rewind speed. You can rewind the recording at any time and
watch it while recording is in progress.
- Pause the currently viewed content. Recording continues in the background.
- Resume playback of the recording.
- Fast-forward the recording. Press this button multiple times to change the playback speed.
- Press this button at any time to stop recording. The option to save the recording or delete it will be displayed.
button to exit the information screen.
(left) or (right) button. You can tell that the TV is recording
83