purline FIRECOOL COMPACT Anleitung Seite 17

INSTALLATION
Please reserve a normal 240V electrical power socket on the right side of the fireplace.
Fig.01
NOTE
The fireplace is designed to be embedded, or it can work as an individual unit without any
insert. It doesn't need any ventilation in the housing.
TWO ways to insert the fireplace:
a.
The bottom (or feet) of the fireplace is in contact with the bottom plate of the installation
location, or directly touches the floor.
b.
The fireplace bottom (or feet) does not touch the bottom plate of the installation location
and is embedded for installation.
PAY ATTENTION to the weight-bearing issue, make sure that the panel at the installation
position is strong enough to bear weight of fireplace with full water tank.
EN
17