Measurement Display - boso medicus uno Gebrauchsanweisung

Measurement display

After the end of the measurement, the in-
built valve opens automatically and the
cuff deflates rapidly.
The measured blood pressure values
(systole, diastole, pulse) are displayed (see
EN
illustration 7).
Illustration 7
62
The measurement is stored automatically.
Invalid measurements with an "Err" mes-
sage (see page 66) are not stored.
If the symbol
urement, it is recommended that the meas-
urement is repeated, holding the arm
completely still. If the
Systole
pears again even with the arm held still,
mmHg
this may be an indication of an irregular
heartbeat. Please discuss this with your
doctor at your next visit.
Diastole
mmHg
Pulse/min.
appears after the meas-
symbol ap-