Epson eb-w16sk Startanleitung Seite 16

Correcting using
Correct keystone distortion for the receiver's frame (green).
H/V-Keystone
Select H/V-Keystone.
Use the [ ] [ ] [ ] [ ]
buttons to select the corner you
want to correct, and then press
the [ ] button.
16 16 16 16 16
Use the [ ] [ ] buttons to
select the direction you want
to correct, and then press the
[ ] [ ] buttons to make
corrections.
Use the [ ] [ ] [ ] [ ]
buttons to correct the position of
the corners.
Correct each corner as necessary.
Press the [Esc] button to finish
making settings.
When you have finished making
corrections, press the [Esc]
button until the top screen is
displayed.
H
Press the [Esc] button to finish
making settings.
When you have finished making
corrections, press the [Esc]
button until the top screen is
displayed.
Correct the four corners of the receiver's
Correcting using
frame (green) individually.
Quick Corner
Select Perform keystone
correction for the Receiver.
Adjust the projection size for the commander's frame
(white).
Commander Receiver
frame frame
Use the commander's zoom ring
to adjust the commander's frame
(white) so that it is outside the
receiver's frame (green).
Select Quick Corner.
Adjustment point
• You can improve
the image quality
by minimizing the
difference in size
between the receiver's
frame (green) and the
commander's frame
(white).
• The images can still be
superimposed even if
the commander's frame
is outside the screen.