Epson eb-w16sk Startanleitung Seite 15

D
Commander Receiver
frame frame
The white frame is used to adjust Extend or retract the feet to
the commander, and the green adjust the position.
frame is used to adjust the The rear feet adjust the horizontal
receiver. tilt and the front foot adjusts the
height.
When suspended from a ceiling,
see the User's Guide supplied with
the ceiling mount.
Use the focus ring on the Press the [Esc] button.
projector you want to adjust. When you have finished
correcting the focus for the
commander and the receiver,
press the [Esc] button again.
Adjust the projection E Adjust the focus for the commander and the receiver.
position.
Use the commander's focus
ring to adjust the focus for the
projected image.
F Adjust the projection size for the receiver.
Use the receiver's zoom ring
to adjust the receiver's frame
(green) to the projection size you
want.
Select Display the test pattern, Select the projector you want to
and then press the [ ] button. adjust, and then press the [
button.
The test pattern is displayed.
G
Adjustment point
Do not maximize the zoom
for the receiver because
the commander's frame
needs to be larger than the
receiver's frame.
See "Screen Size and
Projection Distance" on
Select Perform keystone
page 18 to determine the correction for the Receiver.
projection size.
]
Correct keystone
distortion for the
receiver's frame (green).
15 15 15 15 15