Inhaltsverzeichnis
Werbung
CHARGE BATTERY PACK
Only charge the battery pack using the charger supplied.
Charging procedure:
1. Connect the charge to a normal USB connection (e.g.
computer). STATUS LED IS PERMANENTLY ON.
2. Connect the batteries using the provided plugs. STATUS LED
FLASHES
3. Batteries are fully charged STATUS LED GOES OFF (charging
time approx. 4-5 hours). The batteries can also be charged
individually.
READY TO START
1. First switch on the transmitter (LED flashes).
2. Now you can activate the model.
Vehicle "Bind 1"
Slide the main switch on the underside of the model to "ON" (front
headlights flash).
Press "Bind 1" button on the transmitter - headlights go off - sound
is emitted (vehicle is ready for operation)
OFF
ON
1
BASIC OPERATION AND FUNCTIONS
Horn key
• the horn sounds when this button is pressed.
Trailer: "Bind 2"
Slide the main switch on the underside of the trailer to "ON" (rear
lights flash).
Press "Bind 2" button on the transmitter - rear lights go off (trailer
is ready for operation)
Important !! All trailer functions are also available if it is not
coupled.
ON
OFF
2
15 // GB
Werbung
Inhaltsverzeichnis
Fehlerbehebung
