Charge Battery Pack; Charging Via Transmitter - Carson Micro X-Warrior Betriebsanleitung

cHarge battery Pack

Attention:
For charging the battery of the model, please use only the charger which is in delivery. Please pay attention for the notes in the manual.
A. charging via transmitter
B. charging via uSB cable
Turn the model and the transmitter off.
A. charging via transmitter:
Open the Cover of the charging-port and put out the charging wire,
then put it into the interface of the model. The LED on the controller
Mode switch will turn on. The charging time is about 40 minutes.
When the charging is completed, the LED will turn off.
Charging head
B. charging via uSB cable:
Put the USB charging wire into your computer USB interface, the
charging wire will be lightened. Put the other side of the USB
charging wire into the model's interface. The USB charging wire
light will be turned off. The charging time is about 40 minutes. The
charging wire light will turn on, then the model is fully charged.
Charging socket
15 // GB