Listening To Fm/Am Radio - Yamaha R-N301 Bedienungsanleitung

FM/AM tuning
DIMMER
A
COAXIAL
LINE 1
MODE
MODE
FM
FM
AM
AM
POP-UP MENU
1
Press TUNER to select "TUNER" as the input
source.
2
Press FM or AM to select the reception band
(FM or AM).
3
Press and hold TUNING jj / ii for more than
1 second to begin tuning.
Press ii to tune in to a higher frequency.
Press jj to tune in to a lower frequency.
The frequency of the received station is shown in the
front display.
If a broadcast is being received, "TUNED" indicator
on the front display will be lit. If a stereo broadcast is
being received, the "STEREO" indicator will also lit.
¡¡¡¡FM¡98.50MHz
If the tuning search does not stop at the desired
station because the station signals are weak, use the
following keys to set a frequency.
y
When the signal reception for an FM radio station is unstable,
switching to monaural may improve it.

Listening to FM/AM radio

SLEEP
B
SPEAKERS
OPTICAL NET
LINE 2 LINE 3
TUNER CD
TUNER
TUNING
TUNING jj / ii
PRESET
HOME NOW PLAYING
STEREO SP A
TUNED
Frequency
■ Improving FM reception
If the signal from the station is weak and the sound quality
is not good, set the FM band reception mode to monaural
mode to improve reception.
1
Press MODE repeatedly to select "Stereo"
(automatic stereo mode) or "Mono"
(monaural mode) when this unit is tuned in to
an FM radio station.
When Mono is selected, FM broadcasts will be heard
in monaural sound.
Note
The STEREO indicator on the front panel lights up while
listening to a station in stereo mode.
17
En