Preparation; Connections; Connecting Speakers And Source Components - Yamaha R-N301 Bedienungsanleitung

PREPARATION

Connecting speakers and source components

CAUTION
• Do not connect this unit or other components to the main power until all connections between components are complete.
• All connections must be correct: L (left) to L, R (right) to R, "+" to "+" and "–" to "–". If the connections are faulty,
no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be
unnatural and lack bass. Refer to the owner's manual for each of your components.
• Do not let bare speaker wires touch each other or any metal part of this unit. This could damage this unit and/or the speakers.
TV etc.
Audio output
O (digital optical)
Audio output
C
(digital coaxial)
BD/DVD player, etc.
Connecting recording devices
You can connect audio recording devices to the LINE 3 (REC) jacks. This jack outputs the selected input signals (from COAXIAL,
OPTICAL, LINE 1-2, TUNER and CD).
Notes
• Be sure to use the LINE 3 (REC) jacks only for connecting recording devices.
• If you select LINE 3 as the input source, the audio output of the LINE 3 (REC) jacks will be muted.
10
En

Connections

DIGITAL ANTENNA
FM
AM
75 Ω
OPTICAL
CD
COAXIAL
Audio Audio
output output
CD player
DC OUT NETWORK
5V 0.5A
LINE
PB REC
1 2 3
Audio
input
CD recorder, etc.
Speakers A
SPEAKERS
A
B
Speakers B