Status Indicator Light And Alarm Sounds - ECOVACS DEEBOTM82 Benutzerhandbuch

3.5 Indicator Light and Alarm Sounds
Indicator Light
AUTO Mode Button on DM82
Flashes ORANGE
Glows a continuous GREEN
Flashes GREEN
Glows a continuous RED
Flashes ORANGE
Glows a continuous GREEN
Alarm Sounds
If DM82 detects a problem, it emits alarm beeps and the AUTO Mode Button glows RED.
Alarm Sound
One Beep
Two Beeps
Three Beeps
Four Beeps
Note: If the problem persists, please turn OFF the Side Power Switch then turn ON to restart the
robot. If this does not solve the problem, please contact Customer Service.
3. Operating and Programming
Problems
Driving Wheel or Side Brush
malfunction.
Anti-Drop Sensor malfunction
The robot is stuck.
Main Brush malfunction.
Status
The robot is charging.
The robot is fully charged.
The robot is powered ON and is awake.
The robot has a problem.
The robot has low battery.
The robot is cleaning.
Solution
Check Driving Wheels and Side
Brushes for debris and clean as
described in section 4 Maintenance.
Wipe the Anti-Drop Sensors clean as
described in section 4 Maintenance.
Move the robot by hand to a different
area.
Check the Main Brush as described
in section 4 Maintenance.
15
EN