Waste Disposal And Environmental Protection; Ordering Spare Parts - Ikra BLS 31 Gebrauchsanweisung

LONG-TERM STORAGE
If the unit will be stored for an extended period of time:
1. Drain all petrol from the petrol tank into an appro-
priate container. Do not use petrol that has been
stored for more than 60 days. Dispose of the old
petrol in accordance to the respectively applicable
local regulations.
2. Start the engine and allow it to run until it stalls. This
ensures that all petrol has been drained from the
carburettor by using it up.
3. Allow the engine to cool. Remove the spark plug
and put 1 oz. (30 ml) of high-quality engine oil into
the cylinder. Pull the starter rope slowly to distribute
the oil. Reinstall the spark plug.
NOTE: Remove the spark plug and drain all of the
oil from the cylinder before attempting to start the
blower/vacuum after storage.
4. Thoroughly clean the unit and inspect for any loose
or damaged parts. Repair or replace damaged parts
and tighten loose screws, nuts or bolts. The unit is
ready for storage.
TRANSPORTING
• Allow the engine to cool before transporting.
• Secure the unit while transporting.
• Drain the petrol tank before transporting.
• Tighten petrol cap before transporting.
Waste disposal and environmental pro-
tection
Never pour remainders of chain lubricant or 2-stroke
fuel mixture in the drain or sewerage system or soil, but
dispose of it in a proper, environmentally friendly way,
e.g., at a special collecting point or dump.
If your device should become useless somewhere in
the future or you do not need it any longer, do not dis-
pose of the device together with your domestic refuse,
but dispose of it in an environmentally friendly manner.
Thoroughly empty the oil/lubricant and fuel tanks and
dispose of the remainders at a special collecting point
or dump. Please also dispose of the device itself at
an according collecting/recycling point. By doing so,
plastic and metal parts can be separated and recycled.
Information concerning the disposal of materials and
devices are available from your local administration.

ORDERING SPARE PARTS

The following information should be provided when or-
dering spare parts:
• Type of machine
• Item number of the machine
Spare parts
- Upper tube
- Lower tube
- Wheel
- Harness
- Vacuum bag
- Spark plug
- Starter
- Fuel pump (Primer)
- Air filter muffler cover
/
- Petrol cap
GB-14
80020120
80020121
80020110
73104004
80020152
75900249
80020129
75000257
80020140
80020151