Werbung
Verfügbare Sprachen
Verfügbare Sprachen
17026909_0608 UHE KHE 28 Plus KHE Partner Edition.book Seite 15 Dienstag, 17. Juni 2008 3:51 15
f
12 Accessories
Use only genuine Metabo accessories.
If you need any accessories, check with your
dealer.
For dealers to select the correct accessory, they
need to know the exact model designation of your
power tool.
See page 4.
A Tools with SDS-Plus shank
B Twist drills for metal and wood
C Carbide drilling crown
D Special grease (for lubricating the tool shanks)
For a complete range of accessories, see
www.metabo.com or the main catalogue.
13 Repairs
Repairs to electrical tools must be carried out by
qualified electricians ONLY!
Any Metabo power tool in need of repair can be
sent to one of the addresses listed in the spare
parts list.
Please enclose a description of the fault with the
power tool.
14 Environmental Protection
Metabo's packaging can be 100% recycled.
Worn out power tools and accessories contain
considerable amounts of valuable raw and plastic
materials, which can be recycled.
These instructions are printed on chlorine-free
bleached paper.
Only for EU countries: Never dispose of
power tools in your household waste! In
accordance with European Guideline 2002/
96/EC on used electronic and electric equipment
and its implementation in national legal systems,
used power tools must be collected separately
and handed in for environmentally compatible
recycling.
15 Technical Specifications
Explanatory notes on the specifications on page 2.
Changes due to technological progress reserved.
P
=
Rated input
1
P
=
Power output
2
n
=
No-load speed
1
n
=
Load speed
2
ø
=
Maximum drill diameter
max
s
=
Maximum impact rate
max
W
=
Single impact force
m
=
Weight
D
=
Collar diameter
b
=
Drill chuck chucking capacity
Vibration total value (vector sum of three
directions) determined in accordance with EN
60745:
a
= Vibration emission value (hammer
h, HD
drilling into concrete)
a
= Vibration emission value (chiselling)
h, Cheq
a
= Vibration emission value (drilling
h, D
into metal)
K
= Uncertainty (vibration)
h,HD/Cheq/D
The vibration emission level given in this informa-
tion sheet has been measured in accordance with
a standardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
The declared vibration emission level represents
the main applications of the tool. However if the
tool is used for different applications, with different
accessories or poorly maintained, the vibration
emission may differ. This may significantly
increase the exposure level over the total working
period.
An estimation of the level of exposure to vibration
should also take into account the times when the
tool is switched off or when it is running but not
actually doing the job. This may significantly
reduce the exposure level over the total working
period.
Identify additional safety measures
to protect the operator from the effects of
vibration such as: service the
tool and the accessories,
keep hands warm, organise
work patterns.
Typical A-effective perceived sound levels:
L
= Sound pressure level
pA
L
= Acoustic power level
WA
K
, K
= Uncertainty (noise level)
pA
WA
During operation the noise level can exceed 85
dB(A).
Wear ear protectors!
Measured values determined in conformity with
EN 60745.
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
ENGLISH
ENG
15
Quicklinks ausblenden:
Werbung
Kapitel
