Philips GC4880-Serie Benutzerhandbuch Seite 5

Do not put perfume, vinegar, starch, descaling agents, ironing
aids or other chemicals in the water tank.
3 Close the water filling door ( 'click').
Temperature and steam setting
Table 1:
Warning: Do not use steam or steam boost at low
temperature, as indicated in the below table. Otherwise,
hot water may leak from the iron.
Fabric type Temperature
setting
Linen MAX
●●●
Cotton
●●
Wool
●●
Silk
●
Synthetic
fabric (e.g.
acrylic, nylon,
polyamide,
polyester)
1 Refer to Table 1 to set the temperature dial to the
appropriate setting for your garment.
2 Refer to Table 1 to set the appropriate steam setting for
your garment.
Note: Make sure that the steam setting you select is suitable
for the set ironing temperature.
3 Put the iron on its heel and plug it in. The temperature
light goes on to indicate that the iron is heating up.
4 When the temperature light goes out, the iron has reached
the correct temperature and you could start ironing.
ENGLISH
Steam Steam
setting boost
Yes
/ ECO
Yes
No
ECO
No
No
7